Graco CU1711 PGM Controller Cable Kit

PGM Controller Cable Kit – Graco Part CU1711

Compatible Systems

• Graco PGM precision gear metering systems
• Equipment whose Graco parts list calls for part number CU1711

The Graco CU1711 PGM Controller Cable Kit is a cable kit sold under Graco part number CU1711. A kit bundles several parts under one part number; contents differ from kit to kit, so check the Graco parts list for this number. This one is listed with cable in its name: a cable makes an electrical or communication connection between components. PGM is Graco's servo-driven precision gear metering system, with 6 cc and 20 cc per revolution gear pumps for ambient, warm melt and hot melt materials.

About the PGM precision gear metering systems

Graco lists uses such as: one-component sealant metering, e.g. with EnDure dispense valves. Graco says the heart of the PGM is the gear meter, which should be mounted as close as practical to the dispense valve.

What the Terms in the Part Name Mean

• Controller: Electronic unit that runs a system.

Before You Order

• Check the connector type and pin count against the mating part, and the sensor or signal type against the control.
• Disconnect power before changing any electrical part.
• Have your equipment model, and the serial number if available, ready if you contact us for help.

Service Notes

• Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.

Frequently Asked Questions