Graco EC8J41 E-Flo DC 5000cc 2x2HP 480V Adv FM/IECEx Sealed Tri-Clamp Stand
Genuine Graco part EC8J41, listed for E-Flo DC electric pumps.
- Graco part number EC8J41
- Voltage: 480V (from the part description)
- Displacement: 5000 cc (from the part description)
- Listed for E-Flo DC electric pumps
- Genuine OEM Graco part
E-Flo DC 5000cc 2x2HP 480V Adv FM/IECEx Sealed Tri-Clamp Stand – Graco Part EC8J41
Compatible Systems
- Graco E-Flo DC electric pumps
- Equipment whose Graco parts list calls for part number EC8J41
- Systems that match the details in the part description
Graco part number EC8J41 is the Graco EC8J41 E-Flo DC 5000cc 2x2HP 480V Adv FM/IECEx Sealed Tri-Clamp Stand, an E-Flo DC pump or system. This part number is a complete unit or system; its size, drive and options are set by the model code and description, so match the exact part number to your equipment. E-Flo DC (Dual Control) is Graco's family of electric pumps for paint circulation and supply in liquid finishing, using an electric motor instead of compressed air.
About the E-Flo DC electric pumps
An electric motor drives the pump (no compressed air, so no icing per Graco). The advanced control module regulates fluid pressure and flow and the pump can run at constant pressure or constant flow. No VFD is required (2-ball page). Graco lists uses such as: Paint circulation and supply in liquid finishing / paint kitchens; Compatible with Graco Intelligent Paint Kitchen technology. Pump displacement, motor horsepower, control level, lower type and approvals vary by part number, so match the exact part number.
Details from the Part Description
- Voltage: 480V
- Displacement: 5000 cc
What the Terms in the Part Name Mean
- Tri-Clamp: 1-1/2 in tri-clamp fluid inlet/outlet fittings (EC3440 page).
- Stand: Pump supplied with a stand (per naming).
Before You Order
- Check the ratio, displacement, wetted material and drive type given in the description against the equipment.
- Confirm the voltage or air supply requirement on site before you order a powered unit.
- Have your equipment model, and the serial number if available, ready if you contact us for help.
Service Notes
- Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.
Frequently Asked Questions
No reviews yet. Be the first to review this product!