Graco YM1133 E-Flo DCi Kit 3HP Advanced 480V TIIS

E-Flo DCi Kit 3HP Advanced 480V TIIS – Graco Part YM1133

Compatible Systems

• Graco E-Flo DCi electric pumps
• Equipment whose Graco parts list calls for part number YM1133
• Systems that match the details in the part description

Graco YM1133 E-Flo DCi Kit 3HP Advanced 480V TIIS (Graco part number YM1133) is a kit. A kit bundles several parts under one part number; contents differ from kit to kit, so check the Graco parts list for this number. E-Flo DCi is Graco's compact electric pump for paint supply and circulation, with a 3 or 5 HP motor and 2-ball and 4-ball versions.

About the E-Flo DCi electric pumps

Switches between constant pressure and constant flow modes. Local control or PLC control through DCi Link with no VFD needed; web interface for monitoring and configuration. Graco lists uses such as: Paint supply and circulation in liquid finishing; Pressure mode for canister fill and non-circulated material; flow mode for constant circulation. It can run in constant pressure or constant flow mode, according to Graco. Graco lists the DCi 2-ball pumps at 145 to 1000 cc per cycle and 6:1 to 46:1 equivalent ratios, and says the pump needs an annual oil change.

Details from the Part Description

• Voltage: 480V

What the Terms in the Part Name Mean

• TIIS: Regional approval variant (per naming).

Before You Order

• A kit is sold under one part number: check the Graco parts list for exactly what it contains.
• Have your equipment model, and the serial number if available, ready if you contact us for help.

Service Notes

• Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.

Frequently Asked Questions