Buy an HVLP Paint Sprayer in Selma
Genuine Graco HVLP turbine systems for cabinets, trim and fine finish, sent straight to Selma from our own floor. Turbine HVLP, air-assisted airless and the guns to match.
Delivering across Selma
3 ZIP codes served:
36701, 36702, 36703
−27%
−27%
−27%
−27%
−27%
−27%
−16%
Which Fine Finish Setup Fits Selma Work?
HVLP trades speed for control. Less atomising pressure means far less overspray and a smoother film. Slower on area, better on anything with a visible surface. Here is how the ranges divide for finishers across Selma and the wider Alabama area.
Turbine HVLP
FinishPro 7.0–9.5. Self-contained, no compressor needed.
Air-Assisted
FinishPro II 395/595. Faster than HVLP, finer than straight airless.
Edge II Guns
For existing turbines. Fine finish where flow-out decides the job.
AirPro & Razor
Shop and booth guns. Waterborne, solvent and automotive refinish.
Fine finish equipment we ship
Serving Selma and the wider Alabama area
- FinishPro HVLP 7.0 / 9.0 / 9.5 — turbine systems
- FinishPro II 395 / 595 PC — air-assisted airless
- Edge II & Edge II Plus — HVLP guns
- AirPro & AirPro EFX — shop and booth guns
- Finex Air Spray — gravity and pressure feed
- Fine Finish Tips — sized to your coating
Not sure which setup?
Give us the material and the surface and we will match turbine or air-assisted to it — thicker coatings need more than a small turbine can give.
+1 713-931-4102 or browse HVLP guns →Buying HVLP in Selma — Common Questions
Straight answers for finishers and cabinet shops in Selma, Alabama.
Do you deliver HVLP sprayers to Selma?
Yes — we ship to all 3 Selma ZIP codes, including 36701, and across Alabama. Orders placed by 1 PM CST ship the same business day.
What does HVLP actually give me over airless?
Much less overspray and a smoother laid-down film. Less product wasted, and less masking to clean up. The trade is speed — HVLP covers area more slowly than airless.
Turbine HVLP or air-assisted airless?
Turbine wins on finish and convenience, air-assisted on throughput. A FinishPro HVLP turbine is self-contained and needs no compressor. A FinishPro II air-assisted rig moves far more material per hour while still breaking it up finely. Volume is the deciding factor between the two.
Do I need to thin the material?
Often, yes — HVLP is more sensitive to viscosity than airless. Lower-stage turbines cannot atomise thick coatings well. Too much thinner and you trade one defect for another.
Can I use an HVLP gun on my existing setup?
Only if the air supply suits it. An Edge II turbine gun is not a compressed-air gun and vice versa. Check CFM before buying a compressed-air gun. Tell us your setup and we will confirm.
Can I get parts for the turbine later?
Yes. Repair kits, air filters and gun internals are held. A blocked filter makes the turbine work hard and shortens its life. Machines ship with full manufacturer warranty.
HVLP & Fine Finish Equipment for Selma, Alabama
Selma, Alabama professionals trust Sprayersandparts.com for factory-genuine Graco parts and equipment. Whether you need a replacement pump, tip, filter, or a complete airless sprayer, we ship to Selma (36701, 36702, 36703) quickly and reliably. Professional painters in Alabama choose Sprayersandparts.com because we maintain deep stock of Graco's most commonly replaced parts: RAC X tips, pump repair kits, gun filters, suction tubes, and hose assemblies — so you're never waiting weeks for back-ordered items. Choosing genuine Graco parts means your sprayer performs as Graco intended — consistent pressure, reliable atomization, and a longer service life. Order from Sprayersandparts.com today and receive your parts in Selma without the hassle of searching multiple suppliers.
We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 3 Selma ZIP codes (36701, 36702, 36703). Same-day dispatch on orders in before 1 PM CST.
Why it matters: higher transfer efficiency pays the machine back in lacquer alone — before you count the hours saved in rework.
Serving Finishers Across Alabama
Graco's service life depends heavily on correct maintenance and genuine parts. For Selma, Alabama painters who rely on their sprayers daily, keeping a stock of key OEM components — tips, filters, and a piston pump repair kit — is standard professional practice. Painters in Selma, Alabama can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.
Sprayers and Parts supplies painting contractors across Alabama with factory-genuine Graco equipment. Our Alabama coverage spans 44 cities and towns — among them Alabaster, Albertville, Anniston.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.
Wherever you are in Alabama, the same stock and the same dispatch times apply.
Working outside Selma? Browse every Alabama city we ship to to find your area.
Find Us on Google
Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Selma.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.