Buy an HVLP Paint Sprayer in Boulder
Authentic Graco HVLP equipment where the coat has to lay down flawlessly, shipped direct to Boulder with no dealer wait. Complete turbine systems, air-assisted rigs and fine finish guns in stock.
Delivering across Boulder
18 ZIP codes served:
80025, 80301, 80302, 80303, 80304, 80305, 80306, 80307, 80308, 80309, 80310, 80314
−27%
−27%
−27%
−27%
−27%
−27%
−16%
Which Fine Finish Setup Fits Boulder Work?
You choose HVLP when the surface will be looked at closely. Low pressure means the material arrives softly and lays down instead of bouncing off. Wrong tool for a building exterior; right tool for cabinetry. Here is how the ranges divide for finishers across Boulder and the wider Colorado area.
Turbine HVLP
FinishPro 7.0–9.5. Portable systems for on-site fine finish.
Air-Assisted
FinishPro II 395/595. Airless output with a softer, finer break-up.
Edge II Guns
For existing turbines. Lacquers, stains and clear coats.
AirPro & Razor
Shop and booth guns. Bench and booth work with compressed air.
Fine finish equipment we ship
Serving Boulder and the wider Colorado area
- FinishPro HVLP 7.0 / 9.0 / 9.5 — turbine systems
- FinishPro II 395 / 595 PC — air-assisted airless
- Edge II & Edge II Plus — HVLP guns
- AirPro & AirPro EFX — shop and booth guns
- Finex Air Spray — gravity and pressure feed
- Fine Finish Tips — sized to your coating
Not sure which setup?
Tell us the coating and what you are finishing and we will match turbine or air-assisted to it — the material's body decides which will atomise it properly.
+1 713-931-4102 or browse HVLP guns →We also ship to 8 nearby Colorado communities
Thornton, Grand-junction, Northglenn, Fountain, Loveland, Cimarron-hills, Windsor, Englewood
Buying HVLP in Boulder — Common Questions
Straight answers for finishers and cabinet shops in Boulder, Colorado.
Do you deliver HVLP sprayers to Boulder?
Yes — we ship to all 18 Boulder ZIP codes, including 80025, and across Colorado. Order before 1 PM CST and it leaves that day.
What does HVLP actually give me over airless?
Far higher transfer efficiency and a finer finish. You lose less to bounce-back and drift. You give up coverage rate for finish quality.
Turbine HVLP or air-assisted airless?
Turbine for portability and the finest finish; air-assisted for speed on volume. A FinishPro HVLP turbine is self-contained and needs no compressor. A FinishPro II air-assisted rig moves far more material per hour while still breaking it up finely. Cabinet shops running daily production usually want air-assisted.
Do I need to thin the material?
More often than with airless, and always to the coating maker's limits. A smaller turbine will struggle with heavier material. Never thin past what the data sheet allows.
Can I use an HVLP gun on my existing setup?
It comes down to CFM and pressure. Turbine guns are matched to their turbine and are not interchangeable with compressed air guns. An undersized compressor starves a shop gun and ruins the pattern. Call and we will match it properly.
Can I get parts for the turbine later?
Yes — turbine repair kits, filters, needles and caps are stocked. Keeping the intake filter clean is the single biggest thing for turbine life. Everything is factory-new with warranty support.
HVLP & Fine Finish Equipment for Boulder, Colorado
From residential painters to large commercial crews, customers in Boulder, Colorado count on Sprayersandparts.com for the full range of Graco spray equipment. We stock OEM parts and complete sprayers and ship to Boulder (80025, 80301, 80302, 80303, and more) fast. Whether you need a Graco Blue RAC X tip for fine finish work, a SwitchTip for reversible unclogging, or a FFLP tip for latex paints, we have your size. We also stock tip extension poles, whip hoses, pressure gauges, and gun repair kits for all Graco models. Order before 2 PM and most in-stock items ship the same business day. Sprayersandparts.com offers straightforward returns and knowledgeable support if you need help identifying the right part for your Graco model.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 18 Boulder ZIP codes (80025, 80301, 80302, 80303, 80304, 80305, 80306, 80307, 80308, 80309, 80310, 80314). Same-day dispatch on orders in before 1 PM CST.
The practical point: on fine finish work the material you save in overspray adds up faster than the equipment costs — and less sanding between coats saves the labour too.
Serving Finishers Across Colorado
Running a Graco airless sprayer in Boulder, Colorado means occasionally replacing wear items — tips, filters, pump packings, and inlet valve assemblies. Sourcing those from an authorized dealer ensures they're made to spec and won't void your warranty or shorten your equipment's life. Keep Sprayersandparts.com bookmarked for your Graco parts needs in Boulder, Colorado. From emergency replacements to scheduled maintenance parts, we have the inventory, the shipping speed, and the product knowledge to keep your operation running.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
Sprayers and Parts supplies painting contractors across Colorado with factory-genuine Graco equipment. We currently serve 47 communities across the state, including Arvada, Aurora, Boulder.Stocking direct means we hold depth on the wear items that fail first — packings, filters, tips and pressure controls — instead of ordering them in. Order before 1 PM CST for same-day dispatch and full tracking across Colorado.
Every Colorado order ships from the same warehouse on the same schedule.
Working outside Boulder? Browse every Colorado city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Boulder.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.