Buy an HVLP Paint Sprayer in Bettendorf
Factory-original FinishPro HVLP rigs built for finish-quality work, dispatched to Bettendorf without a distributor in the middle. FinishPro 7.0, 9.0 and 9.5 turbines, plus Edge II and AirPro guns.
Delivering across Bettendorf
4 ZIP codes served:
52722, 52753, 52767, 52807
−27%
−27%
−27%
−27%
−27%
−27%
−16%
Which Fine Finish Setup Fits Bettendorf Work?
HVLP is about finish quality, not coverage rate. Gentle delivery gives you flow-out rather than dry spray. It will not repaint a warehouse, but it will finish a kitchen properly. Here is how the ranges divide for finishers across Bettendorf and the wider Iowa area.
Turbine HVLP
FinishPro 7.0–9.5. Everything in one unit, plug in and spray.
Air-Assisted
FinishPro II 395/595. Production speed without airless overspray.
Edge II Guns
For existing turbines. Cabinets, trim, doors and millwork.
AirPro & Razor
Shop and booth guns. Gravity, siphon and pressure feed.
Fine finish equipment we ship
Serving Bettendorf and the wider Iowa area
- FinishPro HVLP 7.0 / 9.0 / 9.5 — turbine systems
- FinishPro II 395 / 595 PC — air-assisted airless
- Edge II & Edge II Plus — HVLP guns
- AirPro & AirPro EFX — shop and booth guns
- Finex Air Spray — gravity and pressure feed
- Fine Finish Tips — sized to your coating
Not sure which setup?
Describe the finish you need and the volume and we will match turbine or air-assisted to it — viscosity decides more than anything else here.
+1 713-931-4102 or browse HVLP guns →We also ship to 8 nearby Iowa communities
Clive, Coralville, Marion, Dubuque, Mason-city, Marshalltown, Urbandale, Waterloo
Buying HVLP in Bettendorf — Common Questions
Straight answers for finishers and cabinet shops in Bettendorf, Iowa.
Do you deliver HVLP sprayers to Bettendorf?
Yes — we ship to all 4 Bettendorf ZIP codes, including 52722, and across Iowa. Same-day dispatch applies to orders in before 1 PM CST.
What does HVLP actually give me over airless?
Better control, less waste, and a finish that needs less sanding. More of the material ends up on the workpiece instead of in the air. In exchange it is slower over large surfaces.
Turbine HVLP or air-assisted airless?
Small runs and site work favour turbine; production shops favour air-assisted. A FinishPro HVLP turbine is self-contained and needs no compressor. A FinishPro II air-assisted rig moves far more material per hour while still breaking it up finely. If you are finishing a kitchen a week, the turbine is enough.
Do I need to thin the material?
Usually some thinning, depending on the coating and the turbine stage count. Heavier body needs more turbine stages or a larger needle and cap. Always follow the coating manufacturer's thinning limits — over-thinning causes runs and poor build.
Can I use an HVLP gun on my existing setup?
Depends entirely on your air source. The two systems deliver air very differently. Compressed-air guns like AirPro need enough CFM or they will not atomise properly. Send the details and we will check compatibility.
Can I get parts for the turbine later?
Yes, including turbine rebuild kits and gun wear parts. Air filters matter more than people expect on a turbine. All units carry the genuine Graco warranty.
HVLP & Fine Finish Equipment for Bettendorf, Iowa
Need Graco sprayer parts in Bettendorf, Iowa? Sprayersandparts.com stocks thousands of OEM Graco components — from Magnum X5 and X7 parts to Pro and Ultra Max II repair kits — and ships them straight to Bettendorf (52722, 52753, 52767, 52807). Our Graco parts inventory covers every major series: Magnum (residential), ProX and Ultra Max II (contractor), GMax and King (heavy-duty commercial), Plus HVLP and FinishPro (fine-finish), and TrueCoat (handheld). We stock OEM tips, filters, guns, hoses, and full repair kits for all of them. Sprayersandparts.com makes it easy for Bettendorf painters to keep their Graco equipment in top condition. Browse by part type or sprayer model, add to cart, and your genuine OEM parts will be on their way to Bettendorf the same day.
We keep the first-to-fail items on the shelf — packings, filters, spray tips and pressure controls — and ship to all 4 Bettendorf ZIP codes (52722, 52753, 52767, 52807). Anything ordered before 1 PM CST leaves that day.
Worth knowing: what you do not lose to overspray is money you keep — and the finish needs far less sanding afterwards.
Serving Finishers Across Iowa
Graco airless sprayers are the professional standard for a reason: consistent pressure, fine atomization, and the ability to handle everything from thin stains to heavy latex coatings. In Bettendorf, Iowa, contractors and property owners who paint frequently know that keeping their sprayer in top shape is what separates a smooth job from a frustrating one. Sprayersandparts.com is committed to keeping Bettendorf, Iowa painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.
Send your sprayer model and we will verify fitment before you buy. We stock centrally rather than locally, which is why our inventory runs deeper than a regional dealer.
We ship genuine Graco equipment to painting professionals throughout Iowa. We deliver to 30 cities statewide, from Altoona, Ames, Ankeny and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.
Coverage is identical across Iowa — same inventory, same cut-off.
Working outside Bettendorf? Browse every Iowa city we ship to to find your area.
Find Us on Google
View verified reviews and how to reach us on our Google Business Profile — then order online for delivery to Bettendorf.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.