Buy an HVLP Paint Sprayer in Burnsville
Authentic Graco HVLP equipment where the coat has to lay down flawlessly, shipped direct to Burnsville with no dealer wait. Complete turbine systems, air-assisted rigs and fine finish guns in stock.
Delivering across Burnsville
2 ZIP codes served:
55306, 55337
−27%
−27%
−27%
−27%
−27%
−27%
−16%
Which Fine Finish Setup Fits Burnsville Work?
You choose HVLP when the surface will be looked at closely. Low pressure means the material arrives softly and lays down instead of bouncing off. Wrong tool for a building exterior; right tool for cabinetry. Here is how the ranges divide for finishers across Burnsville and the wider Minnesota area.
Turbine HVLP
FinishPro 7.0–9.5. Portable systems for on-site fine finish.
Air-Assisted
FinishPro II 395/595. Airless output with a softer, finer break-up.
Edge II Guns
For existing turbines. Lacquers, stains and clear coats.
AirPro & Razor
Shop and booth guns. Bench and booth work with compressed air.
Fine finish equipment we ship
Serving Burnsville and the wider Minnesota area
- FinishPro HVLP 7.0 / 9.0 / 9.5 — turbine systems
- FinishPro II 395 / 595 PC — air-assisted airless
- Edge II & Edge II Plus — HVLP guns
- AirPro & AirPro EFX — shop and booth guns
- Finex Air Spray — gravity and pressure feed
- Fine Finish Tips — sized to your coating
Not sure which setup?
Tell us the coating and what you are finishing and we will match turbine or air-assisted to it — the material's body decides which will atomise it properly.
+1 713-931-4102 or browse HVLP guns →We also ship to 8 nearby Minnesota communities
Austin, Moorhead, Rosemount, Anoka, Chaska, Minnetonka-mills, Buffalo, Cottage-grove
Buying HVLP in Burnsville — Common Questions
Straight answers for finishers and cabinet shops in Burnsville, Minnesota.
Do you deliver HVLP sprayers to Burnsville?
Yes — we ship to all 2 Burnsville ZIP codes, including 55306, and across Minnesota. Order before 1 PM CST and it leaves that day.
What does HVLP actually give me over airless?
Far higher transfer efficiency and a finer finish. You lose less to bounce-back and drift. You give up coverage rate for finish quality.
Turbine HVLP or air-assisted airless?
Turbine for portability and the finest finish; air-assisted for speed on volume. A FinishPro HVLP turbine is self-contained and needs no compressor. A FinishPro II air-assisted rig moves far more material per hour while still breaking it up finely. Cabinet shops running daily production usually want air-assisted.
Do I need to thin the material?
More often than with airless, and always to the coating maker's limits. A smaller turbine will struggle with heavier material. Never thin past what the data sheet allows.
Can I use an HVLP gun on my existing setup?
It comes down to CFM and pressure. Turbine guns are matched to their turbine and are not interchangeable with compressed air guns. An undersized compressor starves a shop gun and ruins the pattern. Call and we will match it properly.
Can I get parts for the turbine later?
Yes — turbine repair kits, filters, needles and caps are stocked. Keeping the intake filter clean is the single biggest thing for turbine life. Everything is factory-new with warranty support.
HVLP & Fine Finish Equipment for Burnsville, Minnesota
Serving Burnsville, Minnesota (55306, 55337) and neighboring communities, Sprayersandparts.com offers the complete lineup of Graco airless paint sprayers, HVLP guns, texture sprayers, and OEM replacement parts at competitive prices. Our catalog includes Graco Magnum X5, X7, ProX19, ProX17, FinishPro HVLP sprayers, Ultra Max II 695, 795 and 1095, and Mark V and Mark X contractor sprayers, plus the full range of Graco repair kits, pump packings, filters, spray tips, tip guards, hoses, and gun parts. Every part we sell is OEM — no aftermarket substitutes. Fast shipping, OEM quality, and straightforward customer service — that's what Burnsville customers get when they shop at Sprayersandparts.com. Search by model or part number to find exactly what your Graco sprayer needs.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 2 Burnsville ZIP codes (55306, 55337). Order by 1 PM CST and it ships same day, tracked.
The practical point: on fine finish work the material you save in overspray adds up faster than the equipment costs — and less sanding between coats saves the labour too.
Serving Finishers Across Minnesota
Running a Graco airless sprayer in Burnsville, Minnesota means occasionally replacing wear items — tips, filters, pump packings, and inlet valve assemblies. Sourcing those from an authorized dealer ensures they're made to spec and won't void your warranty or shorten your equipment's life. Sprayersandparts.com is committed to keeping Burnsville, Minnesota painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
Minnesota painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. We deliver to 71 cities statewide, from Albert Lea, Andover, Anoka and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.
Every Minnesota order ships from the same warehouse on the same schedule.
Working outside Burnsville? Browse every Minnesota city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Burnsville.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.