Buy an HVLP Paint Sprayer in Prior-lake
Genuine Graco HVLP turbine systems for cabinets, trim and fine finish, sent straight to Prior-lake from our own floor. Turbine HVLP, air-assisted airless and the guns to match.
Delivering across Prior-lake
4 ZIP codes served:
55352, 55372, 55378, 55379
−27%
−27%
−27%
−27%
−27%
−27%
−16%
Which Fine Finish Setup Fits Prior-lake Work?
HVLP trades speed for control. Less atomising pressure means far less overspray and a smoother film. Slower on area, better on anything with a visible surface. Here is how the ranges divide for finishers across Prior-lake and the wider Minnesota area.
Turbine HVLP
FinishPro 7.0–9.5. Self-contained, no compressor needed.
Air-Assisted
FinishPro II 395/595. Faster than HVLP, finer than straight airless.
Edge II Guns
For existing turbines. Fine finish where flow-out decides the job.
AirPro & Razor
Shop and booth guns. Waterborne, solvent and automotive refinish.
Fine finish equipment we ship
Serving Prior-lake and the wider Minnesota area
- FinishPro HVLP 7.0 / 9.0 / 9.5 — turbine systems
- FinishPro II 395 / 595 PC — air-assisted airless
- Edge II & Edge II Plus — HVLP guns
- AirPro & AirPro EFX — shop and booth guns
- Finex Air Spray — gravity and pressure feed
- Fine Finish Tips — sized to your coating
Not sure which setup?
Give us the material and the surface and we will match turbine or air-assisted to it — thicker coatings need more than a small turbine can give.
+1 713-931-4102 or browse HVLP guns →We also ship to 8 nearby Minnesota communities
Sartell, Bloomington, Faribault, Elk-river, Andover, Crystal, Duluth, West-saint-paul
Buying HVLP in Prior-lake — Common Questions
Straight answers for finishers and cabinet shops in Prior-lake, Minnesota.
Do you deliver HVLP sprayers to Prior-lake?
Yes — we ship to all 4 Prior-lake ZIP codes, including 55352, and across Minnesota. Orders placed by 1 PM CST ship the same business day.
What does HVLP actually give me over airless?
Much less overspray and a smoother laid-down film. Less product wasted, and less masking to clean up. The trade is speed — HVLP covers area more slowly than airless.
Turbine HVLP or air-assisted airless?
Turbine wins on finish and convenience, air-assisted on throughput. A FinishPro HVLP turbine is self-contained and needs no compressor. A FinishPro II air-assisted rig moves far more material per hour while still breaking it up finely. Volume is the deciding factor between the two.
Do I need to thin the material?
Often, yes — HVLP is more sensitive to viscosity than airless. Lower-stage turbines cannot atomise thick coatings well. Too much thinner and you trade one defect for another.
Can I use an HVLP gun on my existing setup?
Only if the air supply suits it. An Edge II turbine gun is not a compressed-air gun and vice versa. Check CFM before buying a compressed-air gun. Tell us your setup and we will confirm.
Can I get parts for the turbine later?
Yes. Repair kits, air filters and gun internals are held. A blocked filter makes the turbine work hard and shortens its life. Machines ship with full manufacturer warranty.
HVLP & Fine Finish Equipment for Prior-lake, Minnesota
Looking for genuine Graco airless paint sprayers and OEM replacement parts in Prior-lake, Minnesota? Sprayersandparts.com ships directly to Prior-lake and the surrounding (55352, 55372, 55378, 55379) zip codes, so you get the exact parts you need without delay. Need a hard-to-find Graco part? We carry spray gun repair kits, needle and seat assemblies, inlet strainers, displacement rod sets, connecting rod kits, outlet valve assemblies, cylinder and piston sets, and pressure transducers — all genuine Graco OEM. We process and ship orders to Prior-lake every business day. Genuine Graco parts, competitive pricing, and real customer support make Sprayersandparts.com the choice for painters and contractors who can't afford to wait.
We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 4 Prior-lake ZIP codes (55352, 55372, 55378, 55379). Anything ordered before 1 PM CST leaves that day.
Why it matters: higher transfer efficiency pays the machine back in lacquer alone — before you count the hours saved in rework.
Serving Finishers Across Minnesota
The difference between genuine Graco parts and aftermarket copies is measurable: tighter tolerances, materials specified to Graco's engineering standards, and compatibility guaranteed for the exact model you own. Painters in Prior-lake, Minnesota who work professionally choose OEM for a reason. Painters in Prior-lake, Minnesota can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.
Minnesota painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. We deliver to 71 cities statewide, from Albert Lea, Andover, Anoka and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.
Wherever you are in Minnesota, the same stock and the same dispatch times apply.
Working outside Prior-lake? Browse every Minnesota city we ship to to find your area.
Find Us on Google
Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Prior-lake.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.