Buy an HVLP Paint Sprayer in Matthews
Authentic Graco HVLP equipment where the coat has to lay down flawlessly, shipped direct to Matthews with no dealer wait. Complete turbine systems, air-assisted rigs and fine finish guns in stock.
Delivering across Matthews
3 ZIP codes served:
28104, 28105, 28106
−27%
−27%
−27%
−27%
−27%
−27%
−16%
Which Fine Finish Setup Fits Matthews Work?
You choose HVLP when the surface will be looked at closely. Low pressure means the material arrives softly and lays down instead of bouncing off. Wrong tool for a building exterior; right tool for cabinetry. Here is how the ranges divide for finishers across Matthews and the wider North Carolina area.
Turbine HVLP
FinishPro 7.0–9.5. Portable systems for on-site fine finish.
Air-Assisted
FinishPro II 395/595. Airless output with a softer, finer break-up.
Edge II Guns
For existing turbines. Lacquers, stains and clear coats.
AirPro & Razor
Shop and booth guns. Bench and booth work with compressed air.
Fine finish equipment we ship
Serving Matthews and the wider North Carolina area
- FinishPro HVLP 7.0 / 9.0 / 9.5 — turbine systems
- FinishPro II 395 / 595 PC — air-assisted airless
- Edge II & Edge II Plus — HVLP guns
- AirPro & AirPro EFX — shop and booth guns
- Finex Air Spray — gravity and pressure feed
- Fine Finish Tips — sized to your coating
Not sure which setup?
Tell us the coating and what you are finishing and we will match turbine or air-assisted to it — the material's body decides which will atomise it properly.
+1 713-931-4102 or browse HVLP guns →We also ship to 8 nearby North Carolina communities
Morrisville, New-bern, Lexington, Lenoir, Indian-trail, Laurinburg, Salisbury, Henderson
Buying HVLP in Matthews — Common Questions
Straight answers for finishers and cabinet shops in Matthews, North Carolina.
Do you deliver HVLP sprayers to Matthews?
Yes — we ship to all 3 Matthews ZIP codes, including 28104, and across North Carolina. Order before 1 PM CST and it leaves that day.
What does HVLP actually give me over airless?
Far higher transfer efficiency and a finer finish. You lose less to bounce-back and drift. You give up coverage rate for finish quality.
Turbine HVLP or air-assisted airless?
Turbine for portability and the finest finish; air-assisted for speed on volume. A FinishPro HVLP turbine is self-contained and needs no compressor. A FinishPro II air-assisted rig moves far more material per hour while still breaking it up finely. Cabinet shops running daily production usually want air-assisted.
Do I need to thin the material?
More often than with airless, and always to the coating maker's limits. A smaller turbine will struggle with heavier material. Never thin past what the data sheet allows.
Can I use an HVLP gun on my existing setup?
It comes down to CFM and pressure. Turbine guns are matched to their turbine and are not interchangeable with compressed air guns. An undersized compressor starves a shop gun and ruins the pattern. Call and we will match it properly.
Can I get parts for the turbine later?
Yes — turbine repair kits, filters, needles and caps are stocked. Keeping the intake filter clean is the single biggest thing for turbine life. Everything is factory-new with warranty support.
HVLP & Fine Finish Equipment for Matthews, North Carolina
Painting professionals in Matthews, North Carolina know that downtime costs money. Sprayersandparts.com keeps your crew moving by delivering genuine Graco airless sprayer parts to the Matthews area (28104, 28105, 28106) with same-business-day processing. We supply everything from Graco Magnum replacement tips and filters to complete Ultra Max II 1095 piston pump assemblies. Our stock also includes Graco spray hoses in 1/4" and 3/8" diameters, ranging from 25 ft to 100 ft, plus all standard Graco gun and hose fittings. Your Graco sprayer investment is protected when you use OEM parts from Sprayersandparts.com. We ship to Matthews daily, offer straightforward returns, and provide part-matching assistance so you order with confidence.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 3 Matthews ZIP codes (28104, 28105, 28106). Same-day dispatch on orders in before 1 PM CST.
The practical point: on fine finish work the material you save in overspray adds up faster than the equipment costs — and less sanding between coats saves the labour too.
Serving Finishers Across North Carolina
The difference between genuine Graco parts and aftermarket copies is measurable: tighter tolerances, materials specified to Graco's engineering standards, and compatibility guaranteed for the exact model you own. Painters in Matthews, North Carolina who work professionally choose OEM for a reason. Sprayersandparts.com is committed to keeping Matthews, North Carolina painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
North Carolina painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. Our North Carolina coverage spans 64 cities and towns — among them Albemarle, Apex, Asheboro.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.
Every North Carolina order ships from the same warehouse on the same schedule.
Working outside Matthews? Browse every North Carolina city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Matthews.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.