Buy an HVLP Paint Sprayer in Kent
Genuine Graco HVLP turbine systems for cabinets, trim and fine finish, sent straight to Kent from our own floor. Turbine HVLP, air-assisted airless and the guns to match.
Delivering across Kent
13 ZIP codes served:
98030, 98031, 98032, 98035, 98038, 98042, 98051, 98055, 98058, 98064, 98089, 98092
−27%
−27%
−27%
−27%
−27%
−27%
−16%
Which Fine Finish Setup Fits Kent Work?
HVLP trades speed for control. Less atomising pressure means far less overspray and a smoother film. Slower on area, better on anything with a visible surface. Here is how the ranges divide for finishers across Kent and the wider Washington area.
Turbine HVLP
FinishPro 7.0–9.5. Self-contained, no compressor needed.
Air-Assisted
FinishPro II 395/595. Faster than HVLP, finer than straight airless.
Edge II Guns
For existing turbines. Fine finish where flow-out decides the job.
AirPro & Razor
Shop and booth guns. Waterborne, solvent and automotive refinish.
Fine finish equipment we ship
Serving Kent and the wider Washington area
- FinishPro HVLP 7.0 / 9.0 / 9.5 — turbine systems
- FinishPro II 395 / 595 PC — air-assisted airless
- Edge II & Edge II Plus — HVLP guns
- AirPro & AirPro EFX — shop and booth guns
- Finex Air Spray — gravity and pressure feed
- Fine Finish Tips — sized to your coating
Not sure which setup?
Give us the material and the surface and we will match turbine or air-assisted to it — thicker coatings need more than a small turbine can give.
+1 713-931-4102 or browse HVLP guns →Buying HVLP in Kent — Common Questions
Straight answers for finishers and cabinet shops in Kent, Washington.
Do you deliver HVLP sprayers to Kent?
Yes — we ship to all 13 Kent ZIP codes, including 98030, and across Washington. Orders placed by 1 PM CST ship the same business day.
What does HVLP actually give me over airless?
Much less overspray and a smoother laid-down film. Less product wasted, and less masking to clean up. The trade is speed — HVLP covers area more slowly than airless.
Turbine HVLP or air-assisted airless?
Turbine wins on finish and convenience, air-assisted on throughput. A FinishPro HVLP turbine is self-contained and needs no compressor. A FinishPro II air-assisted rig moves far more material per hour while still breaking it up finely. Volume is the deciding factor between the two.
Do I need to thin the material?
Often, yes — HVLP is more sensitive to viscosity than airless. Lower-stage turbines cannot atomise thick coatings well. Too much thinner and you trade one defect for another.
Can I use an HVLP gun on my existing setup?
Only if the air supply suits it. An Edge II turbine gun is not a compressed-air gun and vice versa. Check CFM before buying a compressed-air gun. Tell us your setup and we will confirm.
Can I get parts for the turbine later?
Yes. Repair kits, air filters and gun internals are held. A blocked filter makes the turbine work hard and shortens its life. Machines ship with full manufacturer warranty.
HVLP & Fine Finish Equipment for Kent, Washington
Kent, Washington professionals trust Sprayersandparts.com for factory-genuine Graco parts and equipment. Whether you need a replacement pump, tip, filter, or a complete airless sprayer, we ship to Kent (98030, 98031, 98032, 98035, and more) quickly and reliably. Professional painters in Washington choose Sprayersandparts.com because we maintain deep stock of Graco's most commonly replaced parts: RAC X tips, pump repair kits, gun filters, suction tubes, and hose assemblies — so you're never waiting weeks for back-ordered items. Choosing genuine Graco parts means your sprayer performs as Graco intended — consistent pressure, reliable atomization, and a longer service life. Order from Sprayersandparts.com today and receive your parts in Kent without the hassle of searching multiple suppliers.
We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 13 Kent ZIP codes (98030, 98031, 98032, 98035, 98038, 98042, 98051, 98055, 98058, 98064, 98089, 98092). Same-day dispatch on orders in before 1 PM CST.
Why it matters: higher transfer efficiency pays the machine back in lacquer alone — before you count the hours saved in rework.
Serving Finishers Across Washington
Paint sprayer performance comes down to parts quality. In Kent, Washington, professionals who have switched to genuine Graco OEM components report fewer pressure drops, longer pump life, and better tip-to-tip consistency than those who rely on aftermarket alternatives. Bookmark Sprayersandparts.com as your Graco source for Kent, Washington. We maintain inventory year-round, ship every business day, and can help you identify the right part number when you're not sure which component fits your specific unit.
Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.
Across Washington, painting crews and property maintenance teams order their Graco parts from Sprayers and Parts. We deliver to 87 cities statewide, from Aberdeen, Anacortes, Arlington and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.
Wherever you are in Washington, the same stock and the same dispatch times apply.
Working outside Kent? Browse every Washington city we ship to to find your area.
Find Us on Google
Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Kent.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.