Graco 695 XT Lo-Boy Power Cords Electric Airless Sprayers Parts

Graco 695 XT Lo‑Boy Electric Airless Sprayer – Power Cord & Accessory Parts Guide

If you're working with Graco spray equipment, particularly the Graco 695 XT Lo‑Boy electric airless sprayer, understanding the intricacies of its electrical gear is crucial. SprayersAndParts.com provides a detailed Graco parts list specifically for the sprayer’s power cord assembly and related components. Whether you're swapping in Graco magnum x7 parts, prepping Graco paint sprayer parts, building out with Graco pump repair kits, or repairing your gear with trusted advice from Graco pump repair near me, this guide has you covered.

1. Understanding the Power Cord & Control Box Assembly

This sprayer’s robust performance starts with its expertly engineered power system:

• Heavy-Duty Power Cord (120 V or 230 V)
  • Features strain relief bushings to prevent cable damage and maintain tight seals.
  • Molded plug assemblies protect against dust, moisture, and jobsite debris.
  • Replacement power cords often share compatibility with Graco magnum x7 parts, allowing for efficient cross-inventory stocking.

• Strain Relief Gasket Kit
  Includes molded nylon bushings, silicon gaskets, and Lockwashers—preventing both power cord damage and ingress of dirt or moisture.

• Control Box Cover & Labels
  Protective covers shield internal electronics like potentiometers and fixed capacitors, while durable instructional labels ensure compliance and reliability.

2. On-Board Control Components: Safe, Adjustable Power

Embedded within this straightforward electrical package are essential control features:

• Potentiometer & Wiring Harness
  Adjusts output voltage to control motor speed and pressure. Durable wiring harnesses ensure consistent power delivery to the motor.

• Capacitors & Fixed Resistors
  Provide filtered, stable current to the motor and ignition components—preventing surges or interruptions in power.

These factory-grade elements align perfectly with the standard Graco parts list, maintaining factory specifications far better than aftermarket kits.

3. Power Cord Accessories & Maintenance Kits

Upgrade your sprayer’s accessories for enhanced safety and serviceability:

• Cable Mount Clip
  Supports the power cable to prevent strain during tough deployment scenarios.

• Grommet Seal Kit
  Maintains water resistance around the control box’s cable entry point.

• Wire Nuts/Terminal Kits
  Allow wire replacements or re-terminations without needing full harness swaps.

These simple components can significantly extend the life of your sprayer.

4. Wiring Gear In Shared Inventory

Cross-compatibility simplifies stock and service for multi-machine environments:

• Many of these power cord kits overlap with both Graco magnum x7 parts and Lo‑Boy models, making field stocking a breeze.

• By pairing electric Lo‑Boy units with Magnum systems, you can cut redundancy in half—keeping your tool van agile.

5. Power Repair & Rebuild Kits — Stay Jobsite Ready

Keep your machine operational with preventative maintenance:

• Power Cord Repair Kit includes molded plug, grommet, cable clamp, and high-impact strain relief—restoring factory-grade durability in under 10 minutes.

• Control Box Gasket/Seal Rebuild Kits prevent moisture intrusion and debris entry.

• Potentiometer or Capacitor Refurb Kits keep the sprayer performing consistently under load.

These field repairs help avoid catastrophic blowouts and shutdowns mid-job.

6. Why OEM Parts Matter

Tech teams often ask: Why not pick cheap aftermarkets? Here’s why OEM wins every time:

Using genuine parts ensures system integrity, peace of mind, and long-term value.

7. Maintenance Checklist

Follow this guide to keep your sprayer safe and functional:

• Every 3 months: Inspect strain relief grommets and seals; replace cracked or dry grommets.

• At 6 months or 1,000 hours: Swap the power cord if insulation shows wear; reseal control box.

• Annually: Refresh potentiometer or capacitor modules to ensure stable motor speed control.

• Before winter or storage: Disassemble, dry out, and reseal to prevent condensation damage.

8. Find Local Repair Help

Not comfortable doing it yourself? Search “Graco pump repair near me” to connect with certified service centers. These technicians can refurb your cord assembly with OEM replacements and ensure your sprayer is rated and calibrated for safe operation.

9. Integrating with Pump Repair & Maintenance Plans

Your power module is just one part of your system. Pair it with:

• A full Graco pump repair kit to rebuild fluid sections after 500–1,000 hours.

• A Graco replacement pump for heavy-wear systems.

• A complete OEM Graco parts list that includes pump, hoses, tips, filters, and electrical parts.

This holistic approach keeps your equipment mission ready and reduces downtime.

10. OEM Part Numbers & Ordering Reference

Keep these handy for quick ordering:

• 120 V Power Cord Assembly – P/N 24U130 (requests plug, cable clamp, cord, strain relief).

• 230 V Power Cord Assembly – P/N 24U131.

• Grommet & Strain Relief Kit – P/N 15E762.

• Potentiometer – P/N 236101 with seal kit.

• Capacitor Kit (120/230 V) – P/N 10B295.

• Complete Circuit Board Kit – P/N 24U132.

• Cable Clip Kit – P/N 105204.

With these parts on hand, you can perform field-level maintenance or collaborate with local pros (search Graco pump repair near me) for full system rebuilds.

✅ Final Takeaway

While a power cord might seem like a minor component, it's mission-critical in keeping your Graco spray equipment running. These OEM assemblies and seal kits keep voltage reliable, moisture out, and stress down at key junctions. Combined with scheduled Graco pump repair kits and routine maintenance, you’ll maintain performance without surprises.

Opt for factory-grade durability—explore the full Graco parts list at SprayersAndParts.com, stock up on components, and plan your maintenance ahead. Need help choosing parts or locating local technicians? I’m here to help!