Graco Drywall Finishing & Interior Texture Sprayers

Graco Drywall Finishing & Interior Texture Sprayers & Parts For Sale

Using a sprayer to apply drywall is a faster and more accurate method than relying on drywall spreaders and knives alone. While it is still good to tape your seams, as you usually would if you were plastering drywall the old-fashioned way, the remainder of the job will be easier and quicker to complete than ever. You can evenly apply drywall and achieve a much smoother finish. You are also limiting the likelihood of causing a strain or sprain to your arm, shoulder, or wrist due to the repetitive motion that the application of drywall usually entails. If you still coax mud through hopper guns, hawks, or rollers, you’re leaving profit on the mixing bench. Graco’s drywall finishing and interior texture sprayer family—TexSpray RTX, FastFinish, GTX, Mark HD, Mark X Premium and Level-5 skim-coat rigs—replaces three manual steps with one trigger pull, delivering a pristine surface that’s ready for paint in record time. Professionals who switch to these machines routinely double their daily square-foot output while slashing material waste and sanding dust.

Our online store carries Graco Texture Machine Parts and Graco drywall finishing sprayers that double as replacements for general texture tools, such as rollers, hawks and trowels, and hopper guns. The Graco Drywall Texture Sprayer will not only leave you with a professional-quality finish, but it will also allow you to double your productivity. And, the Graco interior texture sprayer can perform multiple tasks, including creating orange peels, level 5s, skim coats and heavy coatings in addition to distributing regular drywall. We also carry the Graco Texture Machine Parts to adjust your sprayer as needed for your intended use.

Browse Our Selection of Graco Drywall Finishing Sprayers & Their Accompanying Parts

If you are in the market for the Graco drywall texture sprayer or Graco texture machine parts, browse our selection. We offer the latest in Graco drywall finishing sprayers and all other brands of commercial and residential sprayers. If you need a Graco drywall texture sprayer, or any type of texturing sprayer for your walls, ceilings or exterior, we are sure to give you exactly what you need and will ship it to your home right away. Simply visit our web store sprayersandparts.com and take a look around for the Graco drywall texture sprayer or Graco texture machine parts, as well as Graco fine finishing sprayers and drywall blades. We have everything you could possibly need to get started with your sprayer project, and you already know that you can count on the accuracy and efficiency of our Graco products!

One Platform—Multiple Finishes

• RTX & FastFinish units push 1.0–1.6 GPM for orange-peel, knock-down and light popcorn textures inside occupied homes.
• GTX 2000EX (air-powered) tackles fine aggregate acrylic and deck coatings straight from the hopper - exclusively at SprayersAndParts.com.
• Mark V / VII / X HD electric sprayers drive up to 3 300 PSI and 2.1 GPM, atomising heavy mud, elastomeric and block-filler in a single pass for Level-5 or fireproofing specs.

Each model arrives as a complete spray package—pump, hose, gun, and tips—so you can roll onto site, prime, and spray in under 10 minutes.

Why Pros Choose Genuine Graco Texture Rigs

1. Endurance™ Chromex Pumps last twice as long as aftermarket steel, shrugging off abrasive silica found in topping muds.
2. SmartControl™ electronics keep pressure within ±1 %, eliminating spray “burps” that wreck a finish coat.
3. QuickAccess™ hopper lids and Easy-Out™ filters cut colour-change and clean-up time by up to 46 %.
4. ProConnect™ lowers swap in under 60 seconds—no wrenches, no lost billable hours.
5. Lifetime Advantage Drive™ gears warrant peace of mind on every project.

Cross-Compatibility Keeps Inventory Lean

Because Graco standardises tips, guards and hose threads across its ecosystem, one parts shelf keeps your entire fleet humming:

• RAC X LP & FFLP tips thread into RTX, Mark, and TrueCoat 360 guns—perfect when trim touch-ups and full-room textures happen the same day.
• BlueMax II hoses in ¼″ and ⅜″ sizes feed both interior texture rigs and gas powered paint sprayers, so spares cover every crew.
• Shared V-Max Blue packings fit GTX, Mark V HD and GMAX II HD, letting you bulk-buy one seal kit for multiple pumps.

Pro Tips for a Glass-Like Finish

• Condition the Mud—Add 8–10 oz of water per bucket, mix with a paddle for 3 min. The smoother slurry atomises at 400 PSI lower pressure, reducing overspray drift.
• Use a 531 tip for Level-5, 627 for orange peel, and 535 for light knock-down. Swap tips—not pressure—to control pattern.
• Backroll fast with a damp ½″ nap roller if humidity exceeds 65 %; this knocks peaks without shaving cure time.
• Flush twice daily when shooting hot muds (rapid-set powders). Set a phone alarm—dried compound murders packings.

Ready to Turbo-Charge Your Drywall Crew?

With Graco drywall finishing and interior texture sprayers, every pull of the trigger is a productivity multiplier. Whether you need a portable RTX 5000PI for single-room remodels or a Mark X Premium that swallows Level-5 spec hotels, SprayersAndParts.com has the chassis, hose, tip, and training to put money back on your calendar.

Browse Graco Texture Sprayers →