The Graco 19X082 SoloTech ST23 Pump, I23-MC-CS-SS-A1-A1-0 is a heavy-duty industrial peristaltic hose pump engineered for transferring abrasive, corrosive, viscous, and shear-sensitive materials. Its seal-less design minimizes maintenance requirements while delivering reliable, consistent flow in demanding industrial environments.
Compatible Machines & Applications
This pump is typically installed as a complete pumping solution within the following systems and equipment:
- Chemical dosing and transfer systems
- Industrial fluid transfer skids
- Paint and coating circulation equipment
- Adhesive and sealant pumping systems
- Wastewater treatment equipment
- Sludge transfer and processing systems
- Mining slurry handling equipment
- Industrial metering and dispensing systems
- Process manufacturing fluid handling systems
- Food and beverage transfer applications (subject to material compatibility requirements)
Product Specifications
| Part Number | 19X082 |
| Series | SoloTech ST23 |
| Pump Size | I23 (23 mm hose size) |
| Drive Configuration | MC Medium-Speed Gearbox (48:1 Ratio) |
| Hose Material | CSM (Hypalon®) |
| Connection Material | 316 Stainless Steel Barb Fittings |
| Roller Material | Standard Aluminum Roller |
| Housing | Painted Aluminum Housing |
| Leak Sensor | Not Included |
| Maximum Pressure | Up to 125 psi (9 bar) |
| Maximum Flow Rate | Up to approximately 17 L/min (4.5–4.7 GPM) |
Key Features
- Peristaltic hose pump design eliminates mechanical seals and valves.
- CSM hose construction provides excellent resistance to many chemicals and abrasive materials.
- 316 stainless steel fittings offer enhanced corrosion resistance.
- Handles viscous, shear-sensitive, and solids-laden fluids with minimal product degradation.
- Reversible operation allows line clearing and product recovery.
- Low-maintenance design helps reduce downtime and service costs.
- Suitable for continuous-duty industrial fluid transfer applications.
Typical Materials Handled
The SoloTech ST23 pump is commonly used for transferring chemicals, coatings, adhesives, slurries, wastewater products, process fluids, and other difficult-to-pump materials where reliable flow and gentle product handling are required.
Frequently Asked Questions
The pump is designed for industrial fluid transfer applications involving abrasive, corrosive, viscous, or shear-sensitive materials. It is commonly used in chemical processing, wastewater treatment, coatings, adhesives, and slurry handling systems.
The CSM (Hypalon®) hose offers excellent resistance to many chemicals, weathering conditions, and abrasive materials, making it suitable for demanding industrial environments.
No. The 19X082 configuration is supplied without a leak detection sensor.
The pump can operate at pressures up to 125 psi (9 bar), depending on system configuration and operating conditions.
No. This is a complete SoloTech ST23 industrial pump assembly typically integrated into custom fluid handling, dosing, transfer, and processing systems rather than a specific sprayer model.
```
