Graco 107590 Pressure Roller Cover

The Graco 107590 Pressure Roller Cover is a 9-inch, 1/2-inch nap replacement designed for Graco pressure-fed roller systems, delivering smooth and consistent finishes on semi-smooth surfaces.

Fits EvenFlow and Magnum 9" pressure roller frames
Ideal for airless sprayer-fed roller systems
Ensures even paint flow and professional coverage
Durable and easy to install replacement cover

$19.1

Based on 0 reviews

Description

Overview & Compatibility for Graco 107590 Pressure Roller Cover

Compatible Machines / Frames

This 9-inch, 1/2-inch nap cover is made for Graco pressure-fed roller frames that connect to airless sprayers.

Graco EvenFlow 9" Pressure Roller Frames / Systems (e.g., EvenFlow frame assemblies)
Graco Magnum 9" Pressure (Power) Roller Frames / Kits
Other Graco 9" pressure roller frames that accept standard 9" covers

Key Specifications

Part Number	Graco 107590
Width	9 inches (230 mm)
Nap (Pile Height)	1/2 inch (13 mm)
Intended Surfaces	Semi-smooth to lightly textured walls & ceilings
Application Method	Pressure-fed (airless) roller systems
Fits Frame Type	Graco 9" pressure/power roller frames (EvenFlow, Magnum, etc.)
Package Contents	1 × Pressure Roller Cover (frame sold separately)

Why Choose the Graco 107590 Pressure Roller Cover?

Pressure-Feed Ready: Optimized for airless sprayer roller frames to deliver continuous paint flow.
9" Coverage: Ideal balance of reach and control for walls, doors, and trim-adjacent areas.
1/2" Nap: Holds sufficient material for semi-smooth surfaces, promoting consistent finish.
Quick Swap: Standard 9" cover installs fast on compatible Graco frames.

Use & Care Tips

Pre-condition the cover per coating instructions to reduce lint on first pass.
Keep the roller saturated during use for uniform film build and fewer lap marks.
Clean promptly after use per paint manufacturer guidelines to extend roller life.
Store dry and covered to protect the nap between jobs.

No. This cover is engineered for pressure-fed roller frames that connect to an airless sprayer. Standard dip-tray rollers use different cores and are not compatible.

It fits Graco 9" pressure/power roller frames, including EvenFlow frames and many Magnum pressure roller kits. If your frame is a Graco 9" pressure-fed type, this cover is a likely match.

Suitable for most water-based and many solvent-based architectural coatings typically applied by airless systems. Always confirm compatibility with your coating’s technical data sheet.

The 1/2" nap balances capacity and smoothness on semi-smooth or lightly textured surfaces. For very smooth substrates, consider a shorter nap; for rougher textures, a longer nap may be better.

This listing is for the roller cover only. The pressure roller frame/assembly is sold separately.