Graco 109505 Bushing

The Graco 109505 Bushing is a genuine OEM adapter bushing designed to connect the suction‑tube adapter to the pump fluid inlet, ensuring proper alignment and sealing.

Function: Connects suction adapter to fluid inlet
Compatibility: Graco Ultra Max II Series 695, 795, 1095 and industrial protective coating pumps
OEM Part: Ensures correct fit and durability
Material: Industrial‑grade construction for reliable performance

$40.5

Based on 0 reviews

Description

Graco 109505 Bushing – OEM Adapter Bushing

The Graco 109505 is a genuine OEM bushing manufactured by Graco, designed to connect the suction‑adapter (1½ NPT) to the pump fluid inlet port, ensuring proper alignment and sealing in industrial spray systems. :contentReference[oaicite:1]{index=1}

Compatible Machines

Graco Ultra Max II Series – 695, 795, 1095 portable airless sprayers (fluid section suction kit lists 109505 bushing) :contentReference[oaicite:2]{index=2}
Graco Industrial Protective Coatings Equipment — suction tube adapter & bushing assembly uses 109505 to connect 1½″ NPT adapter to fluid inlet. :contentReference[oaicite:3]{index=3}

Key Features & Benefits

Feature	Benefit
OEM‑Specified Part	Assures precise fit, correct thread sizing and long‑term reliability in Graco systems.
Adapter Bushing Design	Enables smooth connection between the suction tube adapter and the machine’s fluid inlet—supports correct fluid feed and alignment. :contentReference[oaicite:4]{index=4}
Industrial‑Grade Construction	Handles demanding environments typical of high‑production spraying and coatings applications.

Installation Tips

Ensure the machine is depressurized and power is disconnected before servicing.
Verify your model number and parts schematic to confirm 109505 is the correct bushing for your setup.
Clean mating threads and seating surfaces thoroughly to remove debris or old sealant.
When installing, apply appropriate thread sealant or tape if required (consult the machine manual) and do not over‑tighten to avoid thread damage.
After installation, perform a fluid flow and pressure check to ensure proper operation and no leaks around the bushing interface.

Frequently Asked Questions

The 109505 acts as an adapter bushing that connects a 1½″ NPT suction‑tube adapter (used in fluid‑feed systems) to the pump’s fluid‑inlet port. It ensures correct alignment, thread interface and sealing within the fluid section of Graco machines. :contentReference[oaicite:5]{index=5}

Compatibility depends on the fluid‑section configuration of your machine. Confirm your machine model and check its parts manual for part 109505 listed under the suction‑adapter or inlet bushing section. If 109505 isn’t listed explicitly, contact an authorised Graco parts distributor to verify. :contentReference[oaicite:6]{index=6}

If the bushing shows signs of thread damage, corrosion, or leakage, it should be replaced. Because the part plays a key role in sealing and proper alignment of the fluid inlet, any compromise may risk fluid bypass or misalignment—so using a genuine replacement part is strongly recommended.

Graco 109505 Bushing

Graco 109505 Bushing – OEM Adapter Bushing

Compatible Machines

Key Features & Benefits

Installation Tips

Frequently Asked Questions

ADDRESS

INFORMATION

YOUR ACCOUNT

Graco 109505 Bushing

Graco 109505 Bushing – OEM Adapter Bushing

Compatible Machines

Key Features & Benefits

Installation Tips

Frequently Asked Questions

What exactly does the 109505 bushing do?

Is this bushing compatible with my Graco machine?

Can I reuse the existing bushing instead of replacing it?

ADDRESS

INFORMATION

YOUR ACCOUNT

Graco 109505 Bushing – OEM Adapter Bushing