Graco 24J601 Finex Air Spray Gravity Feed Side Cup Gun

Graco 24J601 Finex Air Spray Gravity Feed Side Cup Gun-a lightweight, conventional touch-up/detail gun with a swiveling side cup for clean, controlled finishes in tight spaces.

Conventional air spray (non-HVLP) for smooth atomization
1.0 mm needle/nozzle installed for light–medium coatings
Side-mounted, swiveling cup maintains level feed at angles
Air inlet: 1/4" NPSM | Fluid path: 3/8" NPSM
Standalone gunb - connects to clean, regulated shop air (not tied to specific sprayer machines)
Ideal for wood finishing, automotive spot repairs, and small parts

$235.88

Based on 0 reviews

Description

Overview & Key Benefits

Graco 24J601 Finex Air Spray Gravity Feed Side Cup Gun is a lightweight, conventional (non-HVLP) detail/touch-up gun. Its swiveling side cup lets you maintain a level paint column while spraying at angles—ideal for wood finishing, automotive spot repairs, small parts, and general maintenance coatings.

Compatible Machines / Setups

This model is a standalone air spray gun and does not mount to specific airless sprayer “machines.” It connects to standard compressed air and Finex side-cup accessories.

Any clean, regulated shop air/compressor capable of conventional spray pressures (up to approx. 100 psi working air).
Finex Side Cup assemblies (e.g., 400 cc aluminum cups such as 288891 / 24J884).
Finex needle/nozzle/air cap kits sized for your coating (24J601 ships with 1.0 mm).
Standard air & fluid connections: 1/4" NPSM air inlet, 3/8" NPSM fluid path.

Product Highlights

Conventional air spray atomization for smooth finishes on small areas.
Swiveling side cup improves reach into corners and tight spaces.
Ships with 1.0 mm needle/nozzle for light-to-medium-viscosity materials.
Lightweight, balanced body for reduced fatigue and better control.
Affordable Finex platform with readily available cup and tip kits.

Technical Specifications

Part Number	24J601
Technology	Conventional air spray (non-HVLP)
Needle/Nozzle (as shipped)	1.0 mm (0.039")
Cup Type	Side-mounted, swiveling (compatible with 400 cc aluminum Finex cups)
Air Inlet	1/4" NPSM
Fluid Path/Inlet	3/8" NPSM (typical Finex spec)
Max Working Air (typ.)	Up to ~100 psi (follow coating & booth guidelines)
Approx. Gun Weight	~1.2 lb (gun only; varies with cup)

What’s in the Box

Finex 24J601 spray gun (1.0 mm installed)
Basic documentation & setup guidance

Choose the Right Finex Variant

Model	Nozzle (as shipped)	Best For
24J601	1.0 mm	Light materials, fine detail, spot repairs
24J602 / 24J603	1.2 mm / 1.4 mm	Slightly thicker build or higher flow needs

Setup & Usage Tips

Use clean, dry, regulated air; start low and adjust pressure to achieve desired atomization.
Select needle/nozzle size to match material viscosity and finish quality.
Keep the side cup level when spraying at angles to maintain consistent feed.
Flush and clean the gun immediately after use to preserve performance.

Frequently Asked Questions

No. The 24J601 Finex is a standalone conventional air spray gun. It connects to standard shop air and compatible Finex side-cup accessories, not to airless sprayer machines.

Use a clean, dry, regulated air supply capable of conventional spray pressures (up to ~100 psi working air). Actual settings depend on your coating, nozzle size, and booth requirements.

Yes. The Finex platform supports alternate needle/nozzle/air cap kits. Choose a larger size (e.g., 1.2 mm or 1.4 mm) for thicker coatings or more flow, and smaller for finer atomization.

No. The 24J601 is a conventional air spray gun. If your shop requires HVLP for compliance, select an HVLP model instead.

The 1.0 mm setup suits light to medium-viscosity materials (e.g., clear coats, stains, dyes, thin enamels). For thicker coatings, step up to a larger needle/nozzle kit.