Product Overview – Graco 111808 Male Elbow Fitting
Compatible Machines
- Machines from Graco’s parts catalogue where part 111808 appears
- Any pail-mount spray packages with fluid pressure regulators where “Elbow, male – 111808” is listed as a component
- General Graco equipment requiring male-threaded elbow fittings (verify machine manual for exact fit-location)
Description
The part number 111808 is specified by Graco as “FITTING, ELBOW, MALE”. You will find it in Graco parts breakdowns where it is used as a male-threaded elbow fitting—serving to redirect fluid or air at a 90° (or similar) angle in the equipment plumbing.
This fitting is suitable where a compact elbow connection with male threads is required. Always confirm the thread type, size, fluid type and pressure rating for your application.
Key Features
| Part Number |
111808 |
| Description |
Male-threaded elbow fitting |
| Typical Use |
Redirecting fluid/air in Graco plumbing |
| Manufacturer |
Graco |
Technical Considerations
- Check the **thread type and size** (NPT, BSP, JIC, etc) – ensure it matches the port in your machine.
- Verify the **angle/orientation** (90° or other) so the elbow fits the space in your assembly.
- Check the **fluid type** (paint, solvent, grease, hydraulic oil, etc) and the machine’s working **pressure rating** to confirm compatibility.
- Cross-reference with your machine’s parts list to confirm 111808 is the correct replacement for your specific model and version.
Why Choose This Part?
Using the correct Graco part number ensures proper fit, reliable performance and avoids leaks or failures. Since 111808 is listed by Graco as “Elbow, male” in its parts breakdown for relevant packages, selecting it gives you more confidence in service-level compatibility.
Frequently Asked Questions
The exact thread size/type is not publicised in the generic parts listing. You will need to check your machine’s manual or parts breakdown to confirm the thread specification for the port you are replacing.
Not necessarily. While the part appears in several Graco parts catalogues, correct application depends on matching the thread size, fluid type and orientation in your specific machine. Always verify with your machine’s configuration.
- Ensure the port threads match (type & size).
- Confirm the elbow angle does not interfere with machine layout.
- Make sure the fitting is rated for your fluid and operating pressure.
- Use proper sealant or thread tape recommended for your machine and fluid type.
Based on listings from Graco parts catalogues where part 111808 appears.
