Graco 69-625 Uni-Tip 625 Tip Assembly

Compatible Machines 

The Graco 69-625 Uni-Tip 625 Tip Assembly is designed to work with most professional airless paint sprayers that use standard Uni-Tip or flat spray tip guards. It installs directly into the spray gun’s tip guard and provides a wide fan pattern suitable for high-volume coating applications.

• Graco Ultra Series Airless Paint Sprayers
• Graco GMax Series Sprayers
• Graco Mark Series Sprayers
• Graco LineLazer Striping Machines
• Graco FieldLazer Walk-Behind Striping Machines
• Graco GH Series Hydraulic Sprayers
• Graco DutyMax Series Sprayers
• Airlessco Airless Paint Sprayers
• Other airless sprayers compatible with standard Uni-Tip spray tip guards

Overview of Graco 69-625 Uni-Tip 625 Tip Assembly

The Graco 69-625 Uni-Tip 625 Tip Assembly is a professional airless spray tip designed to control the spray pattern and material flow during coating applications. By determining the fan width and orifice size, this tip ensures consistent coverage, efficient material transfer, and smooth finishes on large surfaces.

The 625 tip size delivers a wide spray pattern and higher flow capacity, making it suitable for spraying thicker coatings and covering large areas such as walls, fences, industrial surfaces, and commercial painting projects.

Key Features

Understanding the 625 Tip Size

The numbering system used in airless spray tips identifies both the spray fan width and the orifice size.

• The first digit 6 represents a spray fan width of approximately 12 inches when sprayed at a standard distance.
• The last two digits 25 indicate a 0.025-inch orifice that determines the amount of coating material delivered.

This configuration provides a wide spray pattern with higher material flow, making it ideal for large surfaces and coatings that require heavier application.

Common Applications

• Architectural painting projects
• Large wall and ceiling coatings
• Industrial and commercial painting
• Exterior surfaces and fences
• Primers, sealers, and heavy coatings

Tip Installation

The Graco 69-625 Uni-Tip 625 Tip Assembly installs directly into a compatible spray gun tip guard. Once installed, it controls the spray fan pattern and the amount of coating material passing through the gun, helping operators achieve consistent coverage and professional spraying results.

Frequently Asked Questions