Graco 114526 Pipe Tee Fitting

Graco 114526 Pipe Tee Fitting

The Graco 114526 Pipe Tee Fitting is an OEM fluid‑line branching component used in selected Graco machines. It allows a main line to split via a tee fitting and maintain proper fluid/air routing.

Compatible Machines

• Graco 3A6110A Double Wall Hopper
• Graco ToughTek F680e Fireproofing Pump

Key Features

• Used for branching fluid/air lines in Graco equipment
• OEM genuine Graco part – ensures proper fit & reliability
• Straightforward install – replace the tee fitting when leaks or damage occur

Where It’s Used

This tee fitting is listed in manufacturer parts‑lists for hopper and pump systems (for example the 3A6110A hopper and ToughTek F680e pump) where fluid/air lines require a tee junction. :contentReference[oaicite:8]{index=8}

Why Replace It

Over time the fitting may become worn, cracked, or develop leaks at the junction points. Replacing it restores correct line routing and prevents system performance issues.

Replacement Advice

• Always confirm your machine model’s parts list and part number before ordering.
• When replacing, ensure line pressure is relieved and compatible fluid/air lines are clean.
• Use proper thread‑sealant if required by your machine manual.

Installation Notes

• Shut down the machine and relieve system pressure.
• Remove the old tee fitting and clean the connection ports.
• Install the new Graco 114526 tee, ensure alignment, tighten to spec.
• Inspect for leaks under normal system operation and re‑tighten if necessary.