Compatible Assemblies for the Graco 114882 Phillips Pan Head Screw
- Graco spray-guns, paint-sprayers, pumps or fluid-handling equipment where parts diagram lists 114882 – Screw, Phillips, Pan Head. ([Hydradynellc listing](https://www.hydradynellc.com/product/114882/114882-graco?srsltid=AfmBOoo8AuO6CiIVpbBV-x_Nm7hhWm8CKZqpXGluI25y6ggy14V5dPD4&utm_source=chatgpt.com))
- Housing covers, internal panels, mounting plates or assembly points requiring a flush-mount pan-head screw for secure fastening without protrusion.
Product Overview
The 114882 Screw, Phillips, Pan Head is a genuine Graco OEM fastener, designed to securely hold housing covers, panels or internal assemblies while providing a flush or low-profile head finish. Its pan-head design distributes clamping load evenly and reduces the risk of damage or protrusion. :contentReference[oaicite:6]{index=6}
Key features include:
- Phillips-drive pan-head screw — easy to install/remove using standard Phillips screwdriver or bit. :contentReference[oaicite:7]{index=7}
- Flush / low-profile head design — ideal for housings, covers or panels where protruding screw heads can interfere with operation or cause snagging. :contentReference[oaicite:8]{index=8}
- OEM specification — ensures correct thread, head size, material and compatibility with Graco equipment parts. :contentReference[oaicite:9]{index=9}
Why Use This Screw?
Using the correct OEM screw — 114882 — ensures that assemblies remain as designed: secure, sealed (if housing), and with proper head geometry. Using a generic or incorrect screw might lead to improper fit, leaks (if housing cover), or interference due to incorrect head profile or thread. OEM screws maintain reliability, safety, and alignment. :contentReference[oaicite:10]{index=10}
Frequently Asked Questions
“Pan head” means the screw has a flattened, slightly rounded head with a large bearing surface — giving flush or low-profile installation, distributing load evenly and preventing damage to housings or covers.
Only if alternate screw matches exactly same specifications — correct thread size, head type (pan-head), head height/diameter, material and corrosion resistance. Generic screws without exact match may not seat properly, cause leaks or part misalignment.
