Graco 15B516 Fire Explosion Warning (Skin) Label
Compatible Machines
Graco 15B516 Fire/Explosion Warning Label is used across several Graco airless and air-assisted sprayers. Confirm your model’s parts list before ordering.
- FinishPro II 395 (Air-Assisted/Airless)
- FinishPro II 595 (Air-Assisted/Airless)
- Pro 230ES
- Pro 270ES
- MP 300
- MP 400
- Mustang 4800
Product Overview
The Graco 15B516 is a factory safety decal that highlights fire and explosion hazards around flammable vapors, static discharge, and ignition sources. It serves as a visual reminder to follow grounding procedures, ventilate the work area, and use approved components to help prevent accidents.
Why this label matters
- Compliance & safety: Restores missing or damaged warnings to maintain OEM safety guidance.
- Clear visibility: Bold, easy-to-read cautionary text placed near potential ignition/static points.
- OEM fit: Sized and worded per Graco documentation for supported machines.
Specifications & Details
| Part Number | 15B516 |
| Item Type | Fire/Explosion Warning Label (Safety Decal) |
| Typical Location | Applied on sprayer frame or panel where hazard warnings must be visible. |
| Use Case | Replacement for missing, worn, or unreadable OEM safety label. |
| Installation | Clean, dry surface; align per manual diagrams; apply firmly to avoid bubbles and edge lift. |
| Compatibility Note | Verify in your model’s parts manual; label placements may vary by revision. |
Good-to-Know
- Replacing safety labels helps maintain the equipment’s safe operating condition.
- Use only OEM or equivalent labels to ensure proper wording and durability.
- If multiple warnings are specified for your unit, replace any missing or damaged decals together.
Frequently Asked Questions
It appears on many Graco units such as FinishPro II 395/595, Pro 230ES/270ES, MP 300/400, and Mustang 4800. Always confirm against your sprayer’s parts manual or serial-specific IPL before purchase.
Placement is shown in the OEM manual diagrams—usually on a visible frame or panel near ignition/static risk areas. Clean the surface thoroughly and press firmly for full adhesion.
It’s not recommended. Replace missing or damaged decals like 15B516 to maintain clearly visible safety warnings and help ensure safe operation.
