Please wait while we process your order...

Product successfully added to your cart.
Cart Image

Quantity in Cart: 1

Continue Shopping Shopping Cart
Item removed from Cart
X
 
×

sprayersandparts Logo

Product Image

Graco 054753 TubeNylRndBlk.156Od.025Wa

The Graco 054753 Nylon Tube is a genuine OEM replacement part designed for internal fluid routing in Graco proportioning and finishing systems. Built from durable black nylon, it ensures leak-free, chemical-resistant performance.

  • Part Number: 054753
  • Size: .156" OD (5/32") × .025" Wall
  • Material: Black Nylon Tube
  • Used In: ProMix Easy, ProBell, PrecisionFlo, and select Graco feed/flush kits
  • Application: Internal low-pressure fluid transfer line

$6.05
0
Based on 0 reviews
5 ★
0%
4 ★
0%
3 ★
0%
2 ★
0%
1 ★
0%

Graco 054753 – TubeNylRndBlk .156 OD, .025 Wall (OEM Nylon Tube)

Compatible Machines / Systems

This OEM nylon tube is confirmed in the parts/repair manuals for the following Graco finishing & metering systems. Always verify against your unit’s parts list before ordering.

  • ProMix Easy (plural component proportioner) — uses 5/32" (4 mm) OD nylon tube, black, referenced as 054753.
  • PrecisionFlo™ XL Metering Modules — parts breakdown lists 054753 tube in assemblies.
  • ProBell™ Electrostatic Applicator hose bundles and accessories — documentation references 5/32" nylon tube incl. 054753.
  • Feed & Solvent Flush Kits (select models) — parts lists call out 054753 nylon tube lengths.

Key Specifications

Graco Part Number 054753
Description (OEM) Tube, Nylon, Round, Black – .156" OD (5/32" / ≈4 mm), .025" Wall
Material / Color High-density nylon / black
Typical Use Low-volume internal fluid/air routing inside proportioners, applicators, metering modules & accessory kits (not a high-pressure spray hose)
Cut Lengths in Manuals Commonly shown as 2 ft or 0.75 ft segments in specific assemblies (actual length varies by model/kit)

Overview & Benefits

  • Genuine Graco OEM tube for reliable fit and durability.
  • Precise sizing (.156" OD, .025" wall) for leak-tight connections with matching push-to-connect or compression fittings.
  • Chemical-resistant nylon suitable for many coatings/solvents in finishing circuits (verify compatibility with your material).
  • Easy to route & cut — maintain gentle bends; square-cut ends to ensure proper sealing.
  • Check your unit’s parts manual or repair guide bill of materials.
  • Confirm tube runs and cut lengths shown for your assembly.
  • Verify fitting type (push-to-connect, compression, elbows) and replace ferrules if required.

Installation Notes

  1. Power down and de-pressurize the system; observe all safety procedures.
  2. Measure & mark required length from your manual; avoid tight radii that may kink.
  3. Use a sharp tube cutter for a square, burr-free cut; do not crush the OD.
  4. Insert fully into matching fittings (5/32" OD); tug-check for retention and inspect for leaks after startup.

Frequently Asked Questions

It fits models whose official parts manual specifies 054753 or a 5/32" (4 mm) OD, .025" wall black nylon tube. Confirm in your manual before purchase.

No. It’s a small-diameter nylon tube used for internal routing in finishing/proportioning systems. It is not a high-pressure spray hose.

Outer diameter .156" (5/32"), wall thickness .025". The inner diameter is approximately OD minus twice the wall.

Graco manuals list color-coded 5/32" nylon tubes (e.g., 054754 red, 054757 green). Use the exact part number/color your schematic calls for to preserve identification and routing.

Manuals show segments like 2 ft or 0.75 ft within assemblies, but retail listings may provide custom cuts or kit-specific lengths. Check this product’s length option before ordering.

Payment Method   Payment Method   Payment Method   Payment Method 

ADDRESS