Graco 061135 Nylon Fluid Hose, compatible with catalyst and waterborne materials, 1/8 in ID, 475 psi (33 bar)
$900.00
Out of Stock
The Graco 061135 Nylon Fluid Hose is designed for precise fluid transfer in coating systems using catalyst and waterborne materials. It ensures reliable performance in low to medium pressure applications.
- Part Number: 061135
- Inside Diameter: 1/8 inch
- Max Pressure: 475 psi (33 bar)
- Material: Nylon
- Applications: Spray booths, fluid handling, liquid coating systems
This product has been discontinued by the manufacturer.
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Compatibility for Graco 061135 Nylon Fluid Hose (1/8 in ID, 475 psi (33 bar))
Compatible Machines / Systems
This hose is used across industrial finishing and spray booth setups. A model-specific list is not published; verify fit using the specs below.
- Graco in-plant liquid coating / spray booth systems handling catalyst & waterborne materials
- Systems designed for a 1/8 in ID fluid line
- Applications operating at or below 475 psi (33 bar)
- Installations where nylon fluid hose construction is specified/approved
Key Specifications
| Part Number | Graco 061135 |
|---|---|
| Description | Nylon Fluid Hose, compatible with catalyst and waterborne materials |
| Inside Diameter | 1/8 in |
| Max Working Pressure | 475 psi (33 bar) |
| Typical Use | In-plant manufacturing / liquid coating / spray booth fluid lines |
| Hose Material | Nylon |
Highlights & Use Cases
- Suited for catalyst and waterborne coatings in production lines
- Small-ID (1/8 in) hose for precise fluid delivery
- Appropriate where system pressure is ≤ 475 psi (33 bar)
Fitment Checklist (Before You Buy)
- Machine or manifold requires a 1/8 in ID fluid hose
- Operating pressure does not exceed 475 psi (33 bar)
- Your fluid/material is approved for use with nylon hose
- Hose end connections/fittings match your equipment (thread/adapter as specified by the machine manual)
- Meets grounding/ESD and safety requirements of your booth/system
Frequently Asked Questions
A model-by-model fit list is not published. This is an industrial nylon fluid hose used across spray booth and liquid coating systems. Confirm fitment by hose ID (1/8 in), pressure (≤ 475 psi), material compatibility, and your machine’s fitting specs.
Yes—this hose is specified as compatible with catalyst and waterborne materials. Always verify your exact chemistry against your facility’s materials matrix and safety guidance.
The maximum working pressure is 475 psi (33 bar). Your system’s operating pressure must not exceed this rating.
Check your equipment manual for the required thread type/size and any adapters. Match those specs to the hose end connections you plan to use.
It’s designed for in-plant liquid coating applications, but may be used wherever the 1/8 in ID, 475 psi, and nylon compatibility are appropriate and allowed by your safety standards.
No reviews yet. Be the first to review this product!
