Graco 100113 – Male Connector (Specs, Fit & FAQs)
Compatible Machines
This Graco 100113 Male Connector (male elbow/tube connector) appears in the parts breakdown of the following Graco equipment. Always confirm with your specific model’s parts book before ordering.
- InvisiPac GS35 Plug-Free Hot Melt Applicator — selected configurations (Single / Quad variants).
- Air-Driven Stainless Steel Agitators — models 204536, 222695, 224572 (used in tube/connector sub-assembly).
Product Overview
The Graco 100113 Male Connector is a compact, OEM fluid fitting used to join tubing/lines in Graco systems. In many documents it’s described as a male elbow tube fitting (1/4" tube to 1/8" NPT), providing a reliable, leak-resistant connection for coatings, adhesives, and other process fluids.
Key Specifications
| Part Number | 100113 |
| Type | Male connector / male elbow tube fitting |
| Tube Size | 1/4" OD tube (push-in/compression style per assembly) |
| Thread | 1/8" NPT (male) (verify your unit’s thread spec before purchase) |
| Typical Use | Joins tubing/hoses in Graco adhesive, agitation, and coating systems |
| Material | Metal construction (consult your model’s parts book for exact material) |
Fitment Guidance
- Match the tube OD (1/4") and the port thread (1/8" NPT male) on your machine.
- Use appropriate thread sealant on NPT threads; torque per the equipment manual.
- For high-pressure or specialty fluids (hot-melt, solvent-borne), confirm material compatibility.
- When in doubt, check your model’s Instruction/Parts Manual and search for item 100113.
Frequently Asked Questions
Yes—if your unit uses a 1/4" tube connection to a 1/8" NPT male port in that location. This connector appears in hot-melt and agitator manuals and may also be used in select coating/transfer assemblies. Always verify with your model’s parts list.
Manuals list 1/8" NPT (male) for part 100113 in elbow-tube configurations. Some third-party listings summarize it generically as a “male connector.” Check your machine’s documentation to confirm NPT vs. other thread forms before ordering.
Use a compatible thread sealant on NPT threads and torque to the value specified in your equipment’s Instruction/Parts manual. Over-tightening can damage threads or distort the seat.
Go to the Graco Find Manuals & Parts page, enter your exact model (and revision), then confirm the exploded parts diagram calls out item 100113 for your assembly location before purchase.
No widely published supersession is listed for 100113. If your manual shows a different number, follow the manual or contact support with your model & serial.
