Graco 100450 Screw Cap Hex Hd
$35.30
Available to Order
The Graco 100450 Screw Cap Hex Head is a genuine OEM fastener designed for secure assembly in Graco equipment. Ideal for maintaining fit, torque, and safety across compatible models.
- Part Number: 100450
- Type: Hex Head Cap Screw
- Fits: RoadLazer / RoadPak 24G625 & 24G624, Husky 1:1 Circulation Package
- Category: Genuine Graco Replacement Part
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Compatible Machines – Verified Applications
The Graco 100450 Screw, Cap Hex Head is a genuine Graco fastener used across multiple assemblies. Below are confirmed usages from Graco parts lists and manuals.
- RoadLazer / RoadPak – Models 24G625 & 24G624 (listed as “100450 SCREW, cap, hex-hd” in parts list)
- Husky 1:1 Circulation Package – Appears in the assembly bill of materials (listed as “100450 SCREW, cap, hex-hd”)
Product Overview
The 100450 is a hex-head cap screw used to secure critical subassemblies. Using the genuine Graco part maintains fit, torque integrity, and safety compliance.
Key Specs
| Part Number | 100450 |
|---|---|
| Official Description | SCREW, CAP HEX HD |
| Category | Genuine Graco Fastener / Service Part |
| Typical Use | Securing pump/rig components and brackets inside RoadPak/Husky assemblies |
| Replace Interval | As needed (rounding, thread damage, corrosion, or torque loss) |
Ordering & Fit Notes
- Match the part number (100450) from your machine’s parts list.
- Replace fasteners in sets when they secure the same joint to maintain even clamp load.
- Always apply the specified torque from the service manual; use threadlocker only if the manual calls for it.
Frequently Asked Questions
No. While dimensions may look similar, genuine Graco hardware ensures the correct grade, finish, and fit for Graco assemblies. Use OEM to maintain safety and warranty compliance.
Confirmed listings include RoadLazer / RoadPak 24G625 & 24G624 and the Husky 1:1 Circulation Package. It may be present in other models—always cross-check your parts manual by model and serial.
Follow the Graco service manual for your exact machine. Many structural fasteners require a specified torque; threadlocker is used only when the manual specifies it.
Substitutions can change clamp load and galvanic behavior. Use the OEM part or an exact spec equivalent only when approved by Graco documentation.
Clean threads, inspect mating parts, start fasteners by hand, tighten in a cross-pattern where applicable, and torque to spec. Re-check torque after initial run-in if the manual recommends it.
No reviews yet. Be the first to review this product!
