Product Overview
The Graco 15F620 Lid Assembly Kit for 2‑Quart Cup is the OEM lid and sealing assembly designed to close and pressure‑seal a 2‑qt cup (such as part number 15F614) for safe, pressurized spraying or fluid containment. This assembly ensures proper sealing and secure closure, protecting fluid integrity and enabling safe operation at regulated pressures. As part of the official Graco cup system, 15F620 is engineered to fit precisely and maintain sealing tolerance for leak‑free, reliable performance.
Key Features
- OEM‑grade lid assembly for 2‑quart cup systems
- Provides secure pressure seal for safe spray or pressure‑pot operation
- Compatible with 2‑qt cup containers like 15F614
- Ensures leak‑proof fluid retention under regulated pressure
- Easy to install or replace as part of maintenance or assembly build‑up
Technical Specifications
| Feature | Detail |
| Part Number | 15F620 |
| Description | Lid Assembly Kit for 2‑quart Cup |
| Intended Use | Seal and secure 2‑qt cup container (e.g. 15F614) for pressure‑pot or cup usage |
| Compatibility | Graco 2‑qt Cup / Pressure‑Pot systems requiring compatible lid & seal assembly |
Installation / Usage Instructions
To install or use the 15F620 Lid Assembly properly, follow these steps:
- Ensure the 2‑qt cup is empty and sprayer depressurized before handling.
- Place the 15F620 lid assembly onto the cup, aligning sealing surfaces and threads correctly.
- Hand‑tighten or secure per manufacturer’s specifications — avoid over‑tightening to protect gasket integrity.
- Before pressurizing or spraying, verify lid seal and check for leaks by performing a short pressure/air test or using a small amount of fluid or solvent.
Frequently Asked Questions
The 15F620 lid assembly seals and secures a 2‑quart cup, enabling safe pressurization and preventing leaks while maintaining proper fluid containment.
The 15F620 is designed to fit Graco 2‑quart cups, such as part 15F614. Using it with non‑OEM cups may cause improper sealing or leaks.
Using the genuine 15F620 ensures proper dimensions, sealing tolerances, and compatibility with Graco 2‑quart cups, which helps prevent leaks, pressure loss, and coating contamination. Generic lids may not provide reliable sealing or fit.
