Graco 100933 Tapping Screw
$7.20
Available to Order
Graco 100933 Tapping Screw is a genuine OEM fastener designed for secure assembly in various Graco air motors and pump units. It ensures a reliable hold and easy installation where #8-32 pan-head self-tapping screws are required.
- Part Number: 100933
- Type: Self-tapping pan-head screw (#8-32)
- Fits: Graco 208-356 J, 208-357 J, 208-360 J Air Motors
- OEM Quality: Genuine Graco replacement part
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Graco 100933 Tapping Screw — Specs & Compatibility
Compatible Machines
This OEM fastener appears in the parts lists of the following Graco air motor assemblies (verify with your machine’s parts list for serial-range specifics):
- Graco 208-356 Series J Air Motor
- Graco 208-357 Series J Air Motor
- Graco 208-360 Series J Air Motor
- Other Graco pump/air-motor assemblies that specify part 100933 in their exploded diagram or bill of materials
Product Details
| Part Number | 100933 |
|---|---|
| Type | Screw, Tapping, PNHD (pan-head, self-tapping) |
| Thread / Size | #8-32 |
| Typical Length (as cited in manuals) | 3/8 in (verify per model’s parts list) |
| Use Case | General fastener used within Graco air motors and pump assemblies where a self-tapping #8-32 pan-head screw is specified |
| OEM Status | Genuine Graco replacement hardware |
Fit & Verification
- Always confirm against your unit’s exploded parts diagram or manual before purchase.
- If your model is not listed above but the diagram calls out 100933, this screw is compatible.
- For older/series-specific machines, check series/serial breaks noted in the service manual.
Frequently Asked Questions
If your diagram explicitly lists 100933, use it. Some manuals note 3/8" length for reference; follow the parts list for your exact model and series. If your list shows a different part number, order that exact number instead.
Yes—100933 is an OEM Graco part number. Using OEM hardware maintains proper fit and serviceability.
“PNHD” refers to a pan-head screw profile. The part is a self-tapping (#8-32) pan-head fastener used where the mating component is designed for a tapping screw.
Look up the exploded diagram or parts list for your exact model/series (e.g., 208-356 J, 208-357 J, 208-360 J). If the bill of materials lists 100933, it is the correct screw.
Start threading by hand to avoid cross-threading, then drive gently until snug—do not over-torque. Reuse only if threads and head are undamaged; replace if worn.
No reviews yet. Be the first to review this product!
