OEM Specs & Fitment Overview
Compatible Machines / Assemblies
Use this list and your parts diagram to confirm thread, mount, and range. This gauge is for low-pressure fluid circuits (not high-pressure airless up to 3000+ PSI).
- Graco Low-Pressure Fluid Regulators – Models 205425 & 203831 (these regulators specify 101176 0–60 PSI fluid gauge).
- Back-pressure / circulating systems calling for a bottom-mount 1/4″ NPT(M) fluid gauge in the 0–60 PSI range on the manifold or regulator.
- General Graco finishing & industrial rigs using low-pressure fluid regulators with bottom-mount gauge ports (verify on your unit’s diagram).
Graco 101176 – What it is
The Graco 101176 Fluid Pressure Gauge is a compact, bottom-mount instrument used to monitor fluid pressure in low-pressure coating circuits (e.g., at a fluid regulator or manifold). It helps you set/verify working pressure for consistent atomization and finish quality.
Key Specifications
| Part No. | 101176 |
| Pressure Range | 0–60 PSI (0–4 bar) |
| Connection / Mount | 1/4″ NPT(M), bottom-mount |
| Dial Size | 2″ diameter (compact) |
| Typical Use | Low-pressure fluid regulators / manifolds in finishing & industrial spray systems (not for 1000–5000 PSI gauges). |
Features & Benefits
- OEM Graco gauge for reliable readings and drop-in replacement.
- Low-pressure range (0–60 PSI) ideal for regulator outlets and circulating lines.
- Bottom-mount 1/4″ NPT(M) fits common Graco regulator/gauge ports.
- Compact 2″ dial for easy panel or block mounting in tight spaces.
Fitment Notes
- Confirm your machine’s parts diagram for a 1/4″ NPT(M) bottom-mount gauge in the 0–60 PSI range.
- High-pressure airless sprayers (1000–5000+ PSI) require different gauges—do not substitute 101176.
Frequently Asked Questions
It’s a 1/4″ NPT male, bottom-mount fluid gauge. Check your port orientation and space before ordering.
No. 101176 is a 0–60 PSI low-pressure fluid gauge. High-pressure airless systems need gauges rated 1000–5000 PSI with the appropriate mount style.
Graco’s Low-Pressure Fluid Regulators documentation lists 101176 (0–60 PSI) for Models 205425 & 203831. If your rig uses these regulators or an equivalent gauge port/range, 101176 applies.
The dial is 2″—compact enough for crowded panels/manifolds yet readable at a glance, which is typical for low-pressure regulator circuits.
Match three items on your machine’s diagram: pressure range (0–60 PSI), mount (bottom), and thread (1/4″ NPT male). If all three match, 101176 is the correct OEM gauge.
