Graco 101349 Straight Spring Pin
$7.20
Available to Order
The Graco 101349 Straight Spring Pin is a genuine OEM roll pin designed for secure press-fit assembly in Graco equipment. Ideal for maintaining alignment and stability in moving parts.
- Part Number: 101349
- Type: Straight Spring / Drive Pin
- Material: Hardened steel for durability
- Fit Example: Graco 205715 Agitator
- Dimensions: Approx. 4.1 mm × 22.4 mm
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Compatible Machines
- Graco 205715 Agitator — Parts list references 101349 as a drive/spring pin (item reference varies by revision). Please verify in your unit’s parts diagram before ordering.
Product Overview
The Graco 101349 Straight Spring Pin (also called a drive pin or roll pin) is an OEM fastener used to secure rotating or oscillating components in select Graco equipment assemblies. Designed for press-fit retention, it helps maintain alignment and reliability under vibration.
Key Details
| Part Number | 101349 |
|---|---|
| Type | Straight Spring Pin / Drive (roll) pin |
| Typical Function | Press-fit fastener for shafts, levers, and linkage points to prevent slippage and maintain timing/alignment. |
| Dimensions (example application) | Approx. 4.1 mm diameter × 22.4 mm length (as specified in a Graco agitator assembly). Verify against your model’s parts list. |
| Compatibility Guidance | Match by part number in the parts diagram for your exact sprayer/agitator model; do not substitute by size alone. |
| Replace In Pairs? | Not required, but many technicians replace related wear pins at the same service interval for consistency. |
Installation Notes
- Depressurize and disconnect power before service.
- Extract the old pin with the appropriate punch; clean and inspect the bore.
- Align components and press-fit the new pin squarely to full depth without deforming surrounding parts.
- Confirm free movement and re-torque any related fasteners per the service manual.
Frequently Asked Questions
Check your machine’s official parts diagram or service manual and confirm the exact part number 101349 at the referenced assembly location. If it’s not listed, do not assume size-based interchangeability.
Not necessarily. The Graco 101349 Straight Spring Pin is specified for certain assemblies with precise tolerance and length. Using a non-OEM pin can lead to misalignment, loosening, or premature wear.
Use a correctly sized roll-pin punch and a bench block/support to avoid mushrooming the pin or damaging the bore. Press-fit or gentle tapping is typically sufficient when aligned.
Reuse is not recommended. Spring pins lose tension after removal. Install a new 101349 for reliable retention.
No reviews yet. Be the first to review this product!
