Please wait while we process your order...

Product successfully added to your cart.
Cart Image

Quantity in Cart: 1

Continue Shopping Shopping Cart
Item removed from Cart
X
 
×
📢 From June 8th to 25th, phone support will be limited. For assistance, please email us and we will respond as promptly as possible. Orders will continue to be processed normally.

sprayersandparts Logo

Product Image

Graco 101487 Air Motor

The Graco 101487 Air Motor is a durable pneumatic drive designed for Graco agitator assemblies, delivering reliable power for mixing coatings and materials.

  • Part Number: 101487
  • Application: Graco agitators (e.g., 225883 Series B)
  • Drive Type: Rotary Air Motor
  • Max Pressure: Up to 100 psi (7 bar)
  • Power: Approx. 2.5 HP output
  • Use: Industrial mixing & paint-kitchen systems

$2090
0
Based on 0 reviews
5 ★
0%
4 ★
0%
3 ★
0%
2 ★
0%
1 ★
0%

Overview & Key Details

Compatible Machines

  • Graco 225883 Out-board Agitator (Series B) — confirmed use of 101487 Air Motor.

For other Graco drum / out-board agitator assemblies, use only if the parts manual specifically lists 101487.

Product Description

The Graco 101487 Air Motor is a heavy-duty pneumatic motor used to drive Graco agitator assemblies for drums and tanks. It delivers reliable power for mixing coatings and similar fluids in industrial finishing “paint-kitchen” setups. This is an air-driven motor (not an electric pump motor) and is intended for agitator systems that list 101487 in their official parts breakdown.

Key Specifications

Part Number 101487
Type Air Motor (Rotary) for agitator assemblies
Typical Max Air Pressure* Up to 100 psi (7 bar) (per common Graco agitator system ratings)
Power Class* Approx. 2.5 HP (representative of the paired out-board agitator assembly)
Approx. Unit Mass* ~24 lb (reference listing; varies by build/series)

Features & Benefits

  • Pneumatic drive for hazardous or solvent-rich environments where electric motors are unsuitable.
  • Industrial duty build for continuous mixing performance on compatible Graco agitators.
  • Serviceable design with readily available Graco seals, bearings, and hardware (per applicable manuals).

Installation & Maintenance Notes

  • Verify your agitator model/series; install only where the parts list calls out 101487.
  • Use clean, regulated, lubricated air. A downstream FRL (filter-regulator-lubricator) is recommended.
  • Observe rotation direction and coupling alignment to avoid premature wear.
  • Follow the torque, lubrication, and startup procedures in your Graco service manual.

Frequently Asked Questions

Generally, no. 101487 is specified for agitator assemblies. Use it only where your unit’s parts manual lists 101487; most pump-only sprayers do not use this motor.

Check your Graco parts manual or serial-specific breakdown. If the parts list calls out 101487, this is the correct motor. If it lists a different air-motor number, order that exact part.

Follow the air pressure/flow specs in your agitator’s manual. Many out-board agitators are rated up to 100 psi (7 bar) and recommend a lubricator with light oil. Do not exceed your system’s published limits.

This listing is for the air motor only. Mounts, couplers, shafts, blades, guards, and FRL components are sold separately unless otherwise stated on the kit page.

Payment Method   Payment Method   Payment Method   Payment Method 

ADDRESS