Graco 163817 Silver Flat Tip, 817

The Graco 163817 Silver Flat Tip (817) provides precise spray control for fine-finish applications. Ideal for users needing accuracy and a smooth surface finish.

Orifice size: 0.017″ (0.432 mm)
Fan width: 16–18″ for uniform coverage
Tip type: Flat, non-reversible (not RAC)
Use for: Enamels, lacquers, light latex, trim & cabinetry

Retail Price: $52

You save: $15.6 (30.00%)

Our Price: $36.4

Based on 0 reviews

Description

Fine-Finish Flat Spray Tip – 0.017″ Orifice (Silver 817)

Compatible Machines

This Graco 163817 Silver Flat Tip (817) fits spray guns/sprayers that use 163-xxx flat tips (non-reversible) with the appropriate flat-tip guard. It is not a RAC (switch) tip.

Graco spray guns that accept Silver Flat (163-xxx) tips with flat-tip guard
Graco Silver Plus and similar airless guns using flat tips (verify guard style)
Older/legacy Graco airless guns designed for non-reversible flat tips

The Graco 163817 is a Silver Flat Tip (817) for fine-finish control. It provides a consistent fan and precise material delivery for thin to medium coatings where surface quality matters.

Key Features & Specifications

Orifice size: 0.017″ (≈0.432 mm)
Fan width: approx. 16–18″ at standard spray distance
Tip style: Flat, non-reversible (not RAC switch tip)
Intended use: Fine-finish applications (enamels, lacquers, light latex, trims, cabinetry)
Pressure guidance: Use the lowest pressure that achieves a full, even fan to extend tip life

Application Notes

Pair with the correct flat-tip guard and gasket to prevent leaks
Ideal where overspray control and surface finish are priorities
If your gun/sprayer uses RAC (switch) tips, choose the equivalent RAC size instead of this flat tip

At-a-Glance Specs

Attribute	Detail
Part Number	163817 (Silver Flat Tip, 817)
Orifice	0.017″ (≈0.432 mm)
Fan Width	~16–18″ (technique and distance dependent)
Style	Flat, non-reversible (requires flat-tip guard)
Use Case	Fine-finish work: furniture, trim, cabinetry, doors, light architectural

Frequently Asked Questions

Confirm your spray gun uses a flat-tip guard for 163-xxx tips and that the guard threads match your gun. If your system specifies RAC tips, choose the equivalent RAC size instead of this flat tip.

Thin to medium-viscosity coatings (e.g., lacquers, enamels, waterborne finishes, light latex) where a fine finish and control are important. Always strain materials and use the lowest effective pressure.

Replace when the fan shrinks notably or the orifice wears (uneven edges, increased flow, more overspray). Worn tips reduce finish quality and waste material.