Graco 163827 Silver Flat Tip, 827

Graco 163827 Silver Flat Tip (827) provides a wide, consistent flat-fan for faster coverage on larger areas.

With a 0.027" orifice, use on capable sprayers and the correct flat-style tip guard for best results.

Orifice: 0.027" (827)
Pattern: Flat fan; wide pass
Guard: Silver/Contractor flat-style
Best for: Heavier coatings & large surfaces

Retail Price: $52

You save: $15.6 (30.00%)

Our Price: $36.4

Based on 0 reviews

Description

Key Details & Compatibility for Graco 163827 Silver Flat Tip (827)

This page covers the Graco 163827 Silver Flat Tip (827) — a precision airless flat fan tip with a 0.027" orifice, designed for professional coatings where a wider pattern and high flow are required.

Compatible Machines

Fits Graco airless sprayers and guns that accept Silver/Contractor flat-style tips and can support the flow/pressure of a 0.027" tip. Always verify your gun guard and sprayer capacity.

• Graco Ultra Max II 795 / 1095 / 1595
• Graco Mark V HD 3-in-1, Mark X HD 3-in-1
• Graco 395 / 495 / 595 (verify 0.027" capability)
• Graco GMAX II 3900 (and higher) — contractor gas series
• Graco GH 230, GH 300 (industrial/heavy-duty; verify guard)
• Graco Magnum X7 (X5 typically undersized for 0.027"; check capacity)
• Graco ProX17 / ProX19 / ProX21 (verify 0.027" at required PSI)

Product Overview

Flat fan airless spray tip engineered for consistent edges and coverage.
Orifice: 0.027" (827 size) — suitable for heavier coatings & large areas.
Typical fan width: wide pattern for faster pass coverage (verify at 12" distance).
Precision “Silver” series construction for repeatable pattern and flow.
Install with the correct tip guard and gasket; follow gun/sprayer manual.

Specifications

Part Number	163827
Series / Type	Silver Flat Tip (flat fan, non-reversible)
Size Code	827 — 0.027" orifice
Recommended Use	Large surface areas; heavier coatings where a wider spray fan is beneficial
Pressure Rating*	Up to typical airless operating pressures (check sprayer/gun rating & tip guard)
Mounting	Requires compatible flat-style tip guard & gasket (Silver/Contractor type)

Frequently Asked Questions

No. It’s a flat-style (non-reversible) tip from the Silver series. Use the correct flat-tip guard and gasket per your gun/sprayer manual.

Heavier or higher-build materials and large-area coverage where a wider fan helps productivity. Always follow coating manufacturer tip size guidance.

Yes, if your sprayer and gun can support a 0.027" tip and you have the correct flat-style tip guard. Check your specific model’s manual for max tip size and guard type.

Use adequate pump capacity, appropriate mesh filters, correct hose diameter/length, and keep pressure/flow stable. Replace worn tips to maintain edge definition and coverage.