Graco 163835 Silver Flat Tip, 835

Graco 163835 Silver Flat Tip 835 delivers a wide, even fan for fast coverage. Ideal when your gun/guard supports the Silver Flat Tip family and your sprayer can supply the required flow and pressure.

Orifice: 0.035"
Fan Width: ~16–18" at ~12"
Tip Style: flat, non-reversible
Series Rating: up to 5,000 psi (verify gun/sprayer)
Fits: guns using a Silver Flat Tip guard

Retail Price: $52

You save: $15.6 (30.00%)

Our Price: $36.4

Based on 0 reviews

Description

Key Details & Specifications

Compatible Machines / Setups

This tip is intended for Graco airless setups that accept the Silver Flat Tip family and meet the pressure/flow requirements below. Always confirm your spray gun’s guard/tip style and your sprayer’s max flow/pressure in the manual.

Airless spray guns that use a Silver Flat Tip guard (e.g., Graco Silver Plus style guards)
Airless sprayers and rigs rated up to (or above) the tip’s series pressure and flow requirements
Setups where a 0.035" orifice and a broad, flat fan are appropriate for the coating and surface

The Graco 163835 Silver Flat Tip (835) is a precision, flat-pattern airless tip designed for consistent film build and coverage on large surfaces. It is suited to higher-output applications where a larger orifice and broad fan pattern are advantageous.

Specification
Part Number	163835
Tip Model	Silver Flat Tip 835
Orifice Size	0.035"
Approx. Fan Width	~16–18" at ~12" from surface (technique & pressure dependent)
Series Pressure Rating	Up to 5,000 psi (typical for this tip family; verify gun/sprayer rating)
Tip Family	Silver Flat Tip (flat, non-reversible style)
Typical Use	High-output architectural/industrial coatings on broad surfaces where a wide, even fan is preferred

Features & Benefits

Wide, flat fan for rapid coverage on large, open areas
Carbide orifice for durability and pattern consistency
0.035" size supports higher flow for heavier-bodied coatings (within sprayer capability)
Reliable finish quality with proper pressure and filtration

Fit & Usage Notes

Use only with a Silver Flat Tip compatible guard; not the same as RAC reversible tips
Confirm your gun guard style, sprayer max pressure/flow, and material recommendation before use
Install with gun locked, system depressurized, and filters clean to minimize spitting

Frequently Asked Questions

The 163835 Silver Flat Tip fits guns/guards designed for the Silver Flat Tip family and sprayers rated for the tip’s output/pressure. Check your gun’s guard type, sprayer rating, and manual to confirm compatibility.

Match the orifice size (0.035") and expected fan width (~16–18") to your coating, surface, and production goals. Higher viscosity coatings and faster production often benefit from larger orifices; always verify your sprayer can supply adequate flow and pressure.

No. The Silver Flat Tip is a flat, non-reversible style. If you need on-gun tip clearing (reverse to unclog), consider the RAC tip families instead. Ensure your gun/guard matches the chosen tip family.