Graco 163841 Silver Flat Tip, 841

The Graco 163841 Silver Flat Tip 841 is a high-output spray tip designed for industrial and professional use. It delivers a wide fan pattern and supports heavy coatings efficiently.

Orifice Size: 0.041 inch
Fan Width: 16–18 inches
Max Pressure: 5,000 psi
Tip Type: Silver Flat Tip Series
Ideal For: Heavy coatings and high-build applications

Retail Price: $52

You save: $15.6 (30.00%)

Our Price: $36.4

Based on 0 reviews

Description

Key Details & Compatibility Overview

The Graco 163841 Silver Flat Tip 841 is a high-output flat spray tip for demanding architectural and industrial coatings. Compatibility depends on the sprayer’s pressure/flow capacity and the tip guard interface.

Compatible Machines

Fits Graco professional airless sprayers that can support a 0.041 in orifice and 5,000 psi tip rating, when used with the correct Silver flat-tip guard. Typical compatible families include:

Ultra Max II 1095
Ultra Max II 1595
GMAX II 5900
GMAX II 7900
TexSpray Mark V HD
TexSpray Mark X HD
GH 230
GH 300
DutyMax / DutyMax HD (high-output models)
Other high-capacity contractor/industrial Graco rigs that meet flow/pressure requirements

Key Specifications

Part Number	163841
Tip Series	Silver Flat Tip
Tip Size	841 (approx. 16–18 in fan with 0.041 in orifice)
Max Working Pressure	5,000 psi (345 bar)
Typical Use	High-build architectural & industrial coatings (requires high-capacity pump)
Guard/Thread	Use with the matching Silver flat-tip guard (check gun/guard interface)

Why Choose This Tip

Large 0.041 in orifice for high-output productivity on heavy materials.
Consistent, flat fan pattern (about 16–18 in depending on distance/pressure).
Built for demanding jobs—pair with sprayers capable of sustaining required flow/pressure.

Usage Notes

Confirm your sprayer’s maximum supported tip size and pressure rating before use.
Match the guard/thread to your gun (Silver flat-tip system).
Adjust pressure to achieve a clean edge and proper atomization; flush to clear clogs.

Frequently Asked Questions

The first digit indicates the fan width (approx. 16–18 in at a standard distance) and the last two digits indicate the orifice—here 0.041 in.

It fits machines that accept the Silver flat-tip guard and can support a 0.041 in orifice at up to 5,000 psi. Verify your model’s limits in the manual.

High-build or heavy coatings (e.g., elastomerics or similar). Use only on high-capacity rigs designed for these materials.