Graco 163849 Silver Flat Tip, 849

The Graco 163849 Silver Flat Tip, 849 delivers high-output, flat-pattern spraying for large areas—ideal when your sprayer supports a 0.049 in tip and up to 5000 psi.

Part #: 163849
Tip Type: Silver Flat (single-orifice)
Orifice: 0.049 in (≈1.245 mm)
Fan Width: ~16–18 in (setup dependent)
Pressure: up to 5000 psi
Use With: sprayers rated for 0.049 in tips

Retail Price: $52

You save: $15.6 (30.00%)

Our Price: $36.4

Based on 0 reviews

Description

Overview & Key Details

Compatible Machines

This Graco 163849 Silver Flat Tip, 849 is suitable for high-output airless sprayers that can support a 0.049 in tip and up to 5000 psi. Always confirm your sprayer’s maximum tip size and pressure rating in the manual.

Any airless sprayer rated for 0.049 in tips (or larger) and up to 5000 psi
Typical heavy-duty/industrial lines when rated accordingly (verify in manual), e.g.:
- Graco Mark V / Mark X HD (high-output texture/paint use; confirm tip rating)
- Graco GMax II 5900 / 7900 (gas, high flow; confirm tip rating)
- Graco GH / DutyMax hydraulic series such as GH 300 / 733 / 833 / 933 (confirm configuration & rating)

The Silver Flat Tip 849 is a precision, flat-pattern airless tip designed for large-area coverage and high-build coatings, delivering a consistent fan with minimal edge build-up when paired with a sufficiently rated sprayer.

Key Specifications

Part Number	163849
Tip Type	Silver Flat Tip (flat, single-orifice pattern)
Orifice Size	0.049 in (≈ 1.245 mm)
Typical Fan Width	~16–18 in (application-dependent: pressure, distance, coating)
Max Working Pressure	Up to 5000 psi (≈ 345 bar)
Recommended Use	Large surfaces; higher flow rates; industrial/architectural coatings (when sprayer is rated)
Guard / Mounting	Installs into the backside of the guard; thread the guard onto the spray gun (use compatible flat-tip guard)

Why Choose the Silver Flat Tip 849

High Output: Large orifice supports higher flow for rapid coverage.
Consistent Pattern: Flat fan helps reduce streaking when properly matched to material/pressure.
Durable Build: Engineered for demanding, professional use.
Versatile: Suitable for heavy coatings when the sprayer can support the 0.049 in orifice.

Selection & Setup Tips

Confirm your sprayer’s maximum tip size and pressure before use.
Match tip size to material viscosity and desired production rate.
Start with the lowest pressure that achieves a full, even fan.
Use a compatible flat-tip guard; install tip from the backside of the guard.
Keep filters and strainers clean to maintain pattern quality and flow.

Frequently Asked Questions

It fits sprayers that accept compatible flat-tip guards and are rated for a 0.049 in tip and up to 5000 psi. Check your model’s manual for maximum tip size and required guard type.

Higher-build architectural and industrial coatings where a larger orifice and higher flow are needed. Always match tip size to coating viscosity and your sprayer’s capabilities.

Remove the guard and flush the tip to clear debris. Keep filters/strainors clean and properly sized to minimize clogs.

Use a compatible flat-tip guard. The tip installs from the backside of the guard; then thread the guard onto the spray gun per Graco instructions.