Graco 163865 Gb Tip, Spray,Tc

Graco 163865 GB Tip, Spray, TC (Silver Flat Tip 865) for fast, even coverage. Use only with the Flat Tip Guard 220251 and ensure your sprayer supports this flat, non-reversible tip.

Orifice: 0.065″
Fan Width: ~16–18″ (material/pressure dependent)
Max Pressure: up to 5000 psi
Tip Style: Flat (non-reversible)
Use For: Broad surfaces, primers & high-build coatings

List Price: $54.25

You save: $18.71 (34.49%)

Sale Price: $35.54

Based on 0 reviews

Description

Quick Overview & Compatibility

This part is not model-specific. Compatibility depends on the tip/guard system used on your sprayer.

Works with Graco airless sprayers that use the Flat Tip Guard 220251 (flat, non-reversible tip style).
Generally suitable for contractor/industrial units with sufficient output for a 0.065″ orifice and wide fan (verify your guard/thread type).

Product Overview

The Graco 163865 GB Tip, Spray, TC — also known as Silver Flat Tip 865 — is a precision flat spray tip for airless applications. It produces a wide fan for rapid coverage and installs into a compatible flat-tip guard (e.g., 220251).

Key Specifications

Tip Style	Flat (non-reversible) tip; used with flat-tip guard
Orifice Size	0.065″
Approx. Fan Width	16–18″ (material/pressure dependent)
Max Working Pressure	Up to 5000 psi (≈345 bar)
Required Guard	Flat Tip Guard 220251 (install tip into guard; guard threads to gun)

Fitment Notes

Check that your spray gun currently uses a flat-tip guard (not RAC-X / reversible-style tips).
Confirm pump output and recommended tip range for your sprayer/material before use.
Tip wear enlarges the fan and increases material use—replace as performance changes.

Frequently Asked Questions

This tip fits airless setups that use a flat-tip guard, specifically Guard 220251. If your gun/guard system is RAC-X or another reversible style, switch to the correct flat-tip guard or choose the corresponding tip style for your system.

Typically no. With a 0.065″ orifice and a 16–18″ fan, this tip is optimized for fast, broad coverage. For fine cabinetry or trim, select a smaller orifice and narrower fan matched to your coating and pump.

Insert the tip into the backside of the compatible flat-tip guard, then thread the guard onto your spray gun per manufacturer torque guidance. Inspect for wear or damage regularly; replace the tip when the spray pattern widens or material usage increases noticeably.

The tip is rated up to 5000 psi (≈345 bar). Always follow your sprayer’s operating limits and adjust pressure to achieve a clean, even pattern with minimal overspray.