Graco 163919 GB Tip Spray TC
$35.54
$54.25
Save 34%
Available to Order
Quick facts for Graco 163919 (GB Tip, Spray TC)—useful specs at a glance before you add to cart.
- Series/Type: Silver Flat Tip – Spray TC
- Orifice: 0.019 in
- Fan Width: ~18–20 in (application dependent)
- Max Pressure: up to ~5,000 psi
- Use: Even, flat fan pattern for medium-to-heavier coatings
- Fit Check: Requires compatible Spray TC/Silver Flat Tip guard and sprayer support for a 0.019 in tip
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Key Specs
Compatible Machines
An official, model-specific list for Graco 163919 (GB Tip, Spray TC) is not published in the source data. Please verify compatibility with your sprayer’s manual and the tip guard/series your gun supports.
Key Details
| Part Number | 163919 |
|---|---|
| Tip Series / Type | Silver Flat Tip – Spray TC (GB) |
| Orifice Size | 0.019 in (approx.) |
| Fan Width* | ~18–20 in (application dependent) |
| Max Working Pressure | up to ~5,000 psi |
| Use Case | Airless spraying where a flat fan pattern is desired; confirm guard & gun compatibility. |
Why Choose 163919?
- Flat fan pattern for even coverage on walls, doors, trim, and broad surfaces.
- 0.019 in orifice works for medium-to-heavier coatings (verify sprayer flow support).
- Pairs with the correct tip guard for the Spray TC/Silver Flat Tip family.
- Rated up to ~5,000 psi for typical contractor-grade airless systems.
Compatibility Quick-Check
| Check This | What to Look For |
|---|---|
| Tip Family / Guard | Gun/guard must accept Silver Flat Tip / Spray TC style tips. |
| Sprayer Output | Sprayer must support a 0.019 in tip size (refer to model specs/manual). |
| Coating Viscosity | Match tip size to the coating manufacturer’s spray recommendations. |
| Operating Pressure | System pressure capability up to ~5,000 psi (or as specified by the sprayer). |
Frequently Asked Questions
Compatibility depends on your gun’s tip guard and sprayer support for a 0.019 in flat tip in the Silver Flat Tip/Spray TC family. Check your sprayer manual or tip chart for supported tip series and maximum tip size.
Medium to heavier coatings such as latex paints or acrylics can be candidates, depending on thinning and sprayer capability. Always follow the coating manufacturer’s spray guidance.
Approx. 18–20 in at standard spray distances, but the actual width varies with pressure, tip-to-surface distance, and coating viscosity.
Use the lowest pressure that achieves a clean pattern, maintain proper filtering, strain coatings, and keep the tip/guard clean. Replace worn tips to maintain finish quality and productivity.
No reviews yet. Be the first to review this product!
