Graco 163925 Silver Flat Tip, 925

Graco 163925 Silver Flat Tip (925) — wide, even coverage with a 0.025" orifice and approx. 18–20" fan. Fits standard Graco tip guards; confirm your sprayer’s pressure/flow and coating recommendations.

Orifice: 0.025" (heavier coatings)
Fan: ~18–20" at typical distance
Interface: Graco Silver Flat Tip guard
Use: Large surfaces; quick, consistent finish

Retail Price: $52

You save: $15.6 (30.00%)

Our Price: $36.4

Based on 0 reviews

Description

Overview & Key Details

Compatible Machines

Works with most Graco airless spray guns/sprayers that accept the standard Silver Flat Tip and matching tip guard. Always verify the gun/guard thread and pressure rating for your specific unit.

Ultra Max II 395 / 595 / 795
Ultra Max II 1095 / 1595
Mark V HD 3-in-1
Mark X HD 3-in-1
GMAX II 3900
GH 230 / GH 300
Magnum X5 / Magnum X7
ProX17 / ProX19 / ProX21

Product

Graco 163925 — Silver Flat Tip (925) airless spray tip designed for consistent flat fan with fine edge definition on compatible Graco spray guns and systems.

Specifications

Part Number	163925
Tip Series	Silver Flat Tip
Tip Size Code	925 (fan digit “9” ≈ 18–20" fan at ~12" distance; last two digits “25” = 0.025 in orifice)
Orifice Size	0.025 in (≈ 0.635 mm)
Approx. Fan Width	18–20 in (at typical spray distance; varies by pressure/paint)
Typical Flow (Water @ ~2000 psi)	~0.67 GPM (≈ 2.5 L/min) — indicative only
Max Working Pressure	Up to 5000 psi (345 bar), limited by gun/guard/sprayer rating
Interface	Fits standard Graco tip guards for Silver Flat Tips
Typical Uses	Architectural & industrial coatings where a wide, consistent flat fan is desired

Key Features & Benefits

Wide, even fan for faster coverage on large surfaces.
0.025 in orifice suited to higher-build materials (confirm with coating data sheet).
Graco-standard tip/guard interface for quick swaps and broad gun compatibility.
Durable construction designed for professional, high-duty cycles.

Frequently Asked Questions

It fits most Graco airless guns/sprayers that use the standard Silver Flat Tip guard. Confirm your gun’s tip guard type and pressure rating in the sprayer/gun manual before use.

The first digit sets the fan width (e.g., “9” ≈ 18–20" at ~12"). The last two digits are the orifice in thousandths of an inch (e.g., “25” = 0.025"). Match fan/orifice to your coating, surface size, and sprayer capacity.

Heavier architectural/industrial coatings are typical, but always check the paint manufacturer’s tip size recommendation and confirm your sprayer can sustain the required pressure/flow.

No. Silver Flat Tip is a flat (non-reversible) style. RAC X tips are reversible for clearing clogs and require a compatible RAC X guard. Use the guard/tip style specified for your gun.

Use proper filtration, maintain clean materials, keep spray pressures as low as practical for atomization, and flush/clean after each use. Replace the tip when fan edges round off or when flow increases noticeably.