Graco 163929 Silver Flat Tip, 929
$35.54
$54.25
Save 34%
In Stock
The Graco 163929 Silver Flat Tip (929) delivers a wide, even pattern for fast coverage—ideal when your sprayer supports a .029 in tip.
- Orifice: .029 in
- Fan Width: 18–20 in (typical)
- Max Pressure: ≈ 5000 psi
- Tip Style: Flat (non-reversible)
- Guard: Use 220251 (flat tip guard)
- Fit Check: Sprayer must accept flat tips and a .029 max tip size
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Key Details for 163929
The Graco 163929 Silver Flat Tip (929) is a precision airless flat-style spray tip designed for high output, wide pattern applications. Ensure your sprayer supports a 0.029 in orifice and the correct flat-tip guard before use.
Compatible Machines
This tip is a universal accessory for airless sprayers that accept flat-style tips. Because manufacturers specify maximum tip sizes per sprayer, use the checklist below to confirm fit:
- Sprayer must accept flat-style tips and the matching Flat Tip Guard 220251 (or equivalent flat-tip holder).
- Sprayer’s rated maximum tip size must be ≥ .029 in and operating pressure up to ≈ 5000 psi.
- Use when an 18–20 in fan pattern is appropriate for the job and material.
Technical Specifications
| Part Number | 163929 |
|---|---|
| Tip Code | 929 |
| Orifice Size | 0.029 in (0.029") |
| Fan Width* | 18–20 in (at standard distance); *actual width varies with pressure & distance |
| Max Working Pressure | ≈ 5000 psi |
| Tip Style | Silver Flat Tip (non-reversible flat tip) |
| Recommended Guard | Flat Tip Guard 220251 (or compatible flat-tip holder) |
| Typical Use | Architectural/industrial coatings where a wide, even fan and .029" flow is appropriate. |
Key Benefits
- Delivers a broad 18–20 in fan for faster coverage on large, open surfaces.
- 0.029 in orifice supports higher-build materials (within sprayer limits).
- Flat-style design for straightforward installation with the correct flat tip guard.
Usage & Fit Notes
- Confirm sprayer’s maximum tip size and pressure rating before use.
- Match the guard (e.g., 220251) and ensure the gun/holder is for flat tips.
- Choose material and thinning settings suitable for a .029 tip to maintain pattern quality.
- Monitor wear—worn tips reduce fan width and increase overspray; replace as performance degrades.
| Frequently Asked Questions |
|---|
It fits sprayers that accept flat-style tips and a matching flat tip guard (e.g., 220251), and whose specifications allow a .029 in tip and operating pressures up to approximately 5000 psi. Always confirm in your sprayer’s manual.
The last two digits typically indicate orifice size (.029 in here). Fan width depends on pressure and distance; this tip generally produces about an 18–20 in pattern at standard spray distance.
Use a flat-style tip guard such as 220251 (or a compatible flat-tip holder specified by your gun/sprayer manufacturer).
It can handle higher-build materials when your sprayer’s flow/pressure capacity supports it. Always test a small area and adjust pressure/filtration to maintain a clean pattern with minimal overspray.
Watch for a narrowing fan, tails, or needing more passes for the same coverage—these are signs of wear. Replace the tip when pattern quality drops or material usage increases.
No reviews yet. Be the first to review this product!
