Graco 163935 Silver Flat Tip, 935
$35.54
$54.25
Save 34%
In Stock
A quick way to confirm fit and performance for the Graco 163935 (Silver Flat Tip, 935). Use this to verify guard type and basic spray specs before adding to cart.
- Orifice: 0.035" (higher-build coatings)
- Fan Width: ~18–20" (varies with pressure/material)
- Max Pressure: 5000 psi
- Mount: 7/8" flat-tip guard required (not RAC 5/X)
- Included: Tip only — guard sold separately
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Key Details
Compatible Machines
- Graco airless spray guns that accept a 7/8" flat tip holder/guard (e.g., Silver-series guns).
- Airless sprayers operating up to 5000 psi that support flat-tip style nozzles.
- Not directly compatible with RAC 5 / RAC X quick-change tips unless you use the appropriate flat-tip guard.
The Graco 163935 (Silver Flat Tip, 935) is a precision airless flat tip featuring a 0.035 in orifice and an approximate 18–20 in fan (at typical spray distance). It is rated up to 5000 psi and is part of Graco’s Silver Flat Tip series for controlled, consistent patterns.
Key Specifications
| Part Number | 163935 (also written as 163-935) |
|---|---|
| Series / Type | Silver Flat Tip — airless flat tip |
| Orifice Size | 0.035 in |
| Approx. Fan Width | 18–20 in (at standard distance; actual width varies by pressure/paint) |
| Maximum Working Pressure | 5000 psi |
| Mount / Guard | 7/8" flat tip holder/guard (flat-tip style) |
| Typical Use | Controlled, consistent, flat fan for architectural / industrial coatings |
| What’s Included | Tip only; guard sold separately |
Features & Benefits
- Consistent flat fan for smooth, even coverage.
- 0.035" orifice suitable for higher-build coatings (check material and thinning guidance).
- Up to 5000 psi working pressure for contractor/industrial sprayers.
- Simple, robust design for easy maintenance and repeatable results.
Frequently Asked Questions
Fitment depends on your spray gun’s guard. If your gun uses a 7/8" flat tip holder/guard, this tip will fit. If your gun uses RAC 5 / RAC X quick-change tips, you’ll need the appropriate flat-tip guard to switch to this tip style.
The 0.035" orifice typically yields an 18–20" fan at standard spray distance. Actual fan width and finish depend on pressure, coating viscosity, temperature, and technique. Start at the lowest effective pressure and adjust as needed.
No. The 163935 listing is for the tip only. If you don’t already have a flat-tip guard, you’ll need to purchase one separately to mount this tip to your gun.
No reviews yet. Be the first to review this product!
