Graco 166204 Inlet Adapter
$200.16
In Stock
The 166204 inlet adapter connects the suction tube/hose to the pump inlet. Verify compatibility in your model’s parts manual before ordering.
- Part No.: 166204
- Function: Maintains a sealed fluid path for reliable priming
- Fitment: Use only if your parts list specifies 166204
- Benefit: Minimizes air leaks and improves suction performance
- Install: Clean mating faces; follow the service manual
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Product Overview & Fitment Guidance
Compatible Machines
Use the list below to verify fitment before ordering:
- Any Graco sprayer that lists part number 166204 as the “Adapter, Inlet” in its official parts manual/breakdown.
What This Part Does
Graco 166204 Adapter, Inlet is the fluid-side adapter that connects the suction assembly (pickup tube or hose) to the pump inlet, ensuring a sealed path for coating to enter the pump and maintain prime.
Quick Specs
| Part Number | 166204 |
|---|---|
| Item Name | Adapter, Inlet |
| Function | Joins suction tube/hose to the pump inlet; maintains seal to prevent air leaks and loss of prime. |
| Typical Location | Pump inlet side (fluid section). |
| Fitment Check | Confirm your model’s parts list explicitly calls out 166204 as the inlet adapter. |
Key Benefits
- Restores proper suction and priming when the original inlet adapter is worn or damaged.
- Reduces risk of air intrusion and material leaks at the inlet connection.
- OEM geometry for reliable sealing and alignment with mating components.
Fitment & Installation Notes
- Match the part number in your sprayer’s manual; do not rely on appearance alone.
- Inspect mating threads and sealing faces; clean and replace worn gaskets/O-rings as required by the manual.
- Use only the thread sealant (if any) specified by the manufacturer.
- After installation, prime and check for bubbles or seepage at the inlet connection.
Frequently Asked Questions
Open your model’s parts manual or breakdown and look for the inlet adapter call-out. If it specifies 166204, you have a match. If it lists a different number, use the exact part listed for your model/serial range.
Difficult priming, loss of suction, visible bubbles in the return line, or coating leaking at the inlet connection point. These issues typically indicate wear, damage, or a sealing problem.
Follow the service section of your model’s manual. Some assemblies rely on an O-ring/gasket; others may call for specific thread sealant. Using the wrong method can cause leaks or air draw.
No reviews yet. Be the first to review this product!
