Graco 101961 Screw Thumb
$13.30
In Stock
Graco 101961 Screw, Thumb is a genuine OEM fastener designed for tool-free tightening in Graco pump systems. Ideal for quick adjustments and secure assembly.
- Thread Size: 1/4-20 UNC
- Length: Approx. 1.5"
- Used In: President 10:1 & Monark 5:1 Airless Spray Pumps
- Type: Knurled thumb screw for easy hand tightening
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Quick Compatibility & Specs
Compatible Machines
This Graco 101961 Screw, Thumb appears in OEM parts lists for the following pump systems:
- Graco President 10:1 Airless Spray Pump — Stainless Steel Displacement Pump (Drum-type)
- Graco Monark 5:1 Airless Spray Pump
Product Overview
The Graco 101961 Screw, Thumb is a knurled, hand-tightened fastener used on select Graco industrial pump assemblies (e.g., bung/adaptor or bracketed locations). It enables quick, tool-free adjustment and secure retention.
Key Specifications
| OEM Part Number | 101961 |
|---|---|
| Description | Screw, Thumb (knurled head for tool-free use) |
| Thread/Size* | 1/4-20 UNC (listed at approx. 1.5" length in one OEM parts guide) |
| Typical Application | Adapter/bung brackets, covers, and accessory retention points on select Graco pump systems |
| Material/Finish | OEM-grade hardware (spec varies by production lot; use per machine manual) |
Fitment & Verification Tips
- Match the part callout “Screw, Thumb (101961)” in your exact model’s parts diagram.
- Confirm the threaded location (e.g., adapter/bung bracket) and required length.
- When in doubt, cross-reference by model family (e.g., President 10:1, Monark 5:1) and assembly figure number.
Frequently Asked Questions
Yes. 101961 is an OEM Graco hardware item listed as Screw, Thumb in Graco parts literature for select pump assemblies.
Parts guides list 1/4-20 UNC thread, commonly shown at ~1.5" length in certain assemblies. Always confirm your model’s diagram to verify the exact spec used on your unit.
It’s commonly used for hand-tightened retention points (e.g., bung/adapter brackets or covers) on pump systems such as President 10:1 and Monark 5:1.
Check your model’s OEM parts manual/diagram and look for the exact callout “Screw, Thumb — 101961.” Verify the assembly figure and location (thread size/length) before ordering.
For safety and reliability, use the OEM Graco 101961 where specified. If a substitute is considered, it must match thread (1/4-20 UNC), length, head style, and material—and should be verified against the OEM manual.
No reviews yet. Be the first to review this product!
