Graco 102019 Crystal Gauge
The Graco 102019 Crystal Gauge is a replacement glass lens used in certain Graco pressure gauges found on air regulator assemblies. It restores visibility and protects the gauge face from damage.
- Fits gauges with 2" dial (approx. 51 mm)
- Commonly used on 0–200 psi Graco air regulators
- OEM-grade clarity and durability
- Verify fit by checking your machine’s parts manual for 102019
Part Overview & Compatibility
Compatible Machines
The Graco 102019 Crystal Gauge is a gauge glass/dial component used in certain Graco air pressure gauges found on air regulator assemblies. Because it’s an assembly-level part, it is used across multiple Graco systems. Always confirm by checking your sprayer’s parts manual for 102019 before ordering.
- Graco air regulator assemblies that use a 2" dial gauge with glass P/N 102019
- Finishing / coating systems and air-operated equipment where the OEM gauge specifies 102019
- Service replacements for Graco panels/regulators listing the glass/lens as Crystal Gauge 102019
Graco 102019 Crystal Gauge — What It Is
The Crystal Gauge 102019 is the glass/dial component used in specific Graco pressure gauge assemblies (commonly on air regulators). It is not a complete gauge body; it’s the service part for the gauge’s crystal (lens).
Key Specifications
| Part Number | 102019 |
|---|---|
| Part Name | Crystal Gauge (gauge glass / lens for select Graco pressure gauges) |
| Typical Gauge Type | Air pressure gauge used on Graco regulator assemblies |
| Typical Dial Size | ~2" (51 mm) dial (confirm against your manual) |
| Typical Pressure Range | Commonly seen on 0–200 psi gauges (verify per assembly) |
| Use Case | Replacement crystal/lens when the installed gauge face is cracked, hazy, or damaged |
| Fit Guidance | Match by machine parts manual or gauge/regulator assembly listing 102019 |
Why Choose the Original Part
- Exact fit: Designed to match Graco gauges that specify 102019
- Restores readability: Clear lens helps you see pressure markings accurately
- Cost-effective repair: Replace only the crystal instead of the full gauge (when allowed by assembly)
Install & Verification Tips
- Confirm the gauge model in your parts manual and ensure it lists Crystal Gauge 102019
- Inspect the bezel/seal—replace if your assembly requires a new seal with the crystal
- After installation, verify pressure readings at known setpoints
Frequently Asked Questions
No reviews yet. Be the first to review this product!
