Graco 102207 Screw Set Sch

The Graco 102207 Screw Set, SCH is a genuine socket-head set screw designed for secure fastening in spray guns and agitator assemblies.

Thread size: 1/4-20 × 0.25″
Used in Silver Plus & Flex Plus spray guns
Also fits Graco Agitator Model 25C530
Durable OEM-grade construction for precise tightening

$12.26

Based on 0 reviews

Description

Graco 102207 Screw Set, SCH — OEM Set Screw

Compatible Machines

Graco Silver Plus Airless Spray Gun series (models 234237, 235460, 235461, 235462)
Graco Flex Plus Airless Spray Gun series
Graco Agitator assemblies (e.g., Model 25C530)

Key Features

Genuine Graco 102207 replacement fastener for long-term reliability.
Screw Set, SCH = socket-head set screw for secure, low-profile clamping.
Standard thread size for Graco assemblies: 1/4-20 with approx. 0.25″ length (verify per model manual).
Supports critical assemblies in airless spray guns and agitators.

Technical Specifications

Part Number	102207
Description	Screw Set, SCH (socket-head set screw)
Thread / Size	1/4-20 (length commonly ~0.25″ — confirm per machine)
Typical Torque	Reference range often cited for 1/4-20 set screws: ~96–132 in-lb (11–15 N·m) in certain Graco agitator assemblies (always follow your specific manual).
Material	OEM Graco spec; many listings note stainless steel (SST) for corrosion resistance (confirm by model / environment).
Application	Secures components in Graco airless guns, agitators, and related fluid-handling assemblies.

Installation & Use Notes

Match the part number (102207) to your exact model’s parts list before ordering.
Clean threads and apply a suitable thread treatment if specified by the manual.
Use a properly sized hex/Allen driver; tighten to the torque specified for your model.
After assembly, re-check fastener security following initial run-in.

Cross-Reference / Category

Also Known As	Set Screw, Socket-Head; SCH
Category	Fasteners & Hardware for Graco equipment

Frequently Asked Questions

“SCH” indicates a socket-head style set screw used for compact, secure fastening.

Confirmed examples include Silver Plus and Flex Plus airless spray guns, and certain Graco agitators (e.g., 25C530). Always verify against your model’s official parts list before purchase.

Torque can vary by assembly. A commonly cited range for 1/4-20 set screws in some Graco agitator manuals is ~96–132 in-lb (11–15 N·m). Use the torque value specified for your exact model.

Many listings note stainless steel (SST), but Graco specs can vary by application. Check your manual or contact support if corrosion resistance is critical.

Look up the parts diagram for your exact model on Graco’s site and confirm that 102207 is listed. If needed, provide your model number to customer support for confirmation.