Graco 102397 Fluid Pressure Gauge
$136.50
Available to Order
The Graco 102397 Fluid Pressure Gauge provides accurate monitoring for airless paint sprayers and coating systems up to 3000 psi. Ideal for ensuring correct spray pressure and consistent finish quality.
- Pressure Range: 0–3000 psi
- Connection: ¼″ NPT (male), back-mount
- Fits: Graco Ultra 395 series & other sprayers with ¼″ NPT ports
- Purpose: Monitors fluid line pressure for performance and safety
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Fluid Pressure Gauge – Graco Part 102397 (Specs & Compatibility)
Compatible Machines
- Graco Ultra 395 series — referenced in parts diagrams for fluid-line pressure monitoring.*
- Graco airless sprayers with a gauge port of ¼″ NPT and working pressure ≤ 3000 psi.
- Graco regulators/manifolds that accept a back-mount gauge with ¼″ NPT (male) connection.
Product Overview
The Graco 102397 Fluid Pressure Gauge is a rugged, industrial gauge for monitoring coating/fluid line pressure on high-pressure spray systems. With a 0–3000 psi range and ¼″ NPT center back-mount, it’s suitable for many Graco manifolds and regulators when the thread and pressure rating match.
Key Features
- 0–3000 psi span for typical airless spray applications.
- ¼″ NPT (male), back-mount for compact, direct-manifold installs.
- Easy visual pressure verification to optimize tip selection and finish quality.
- Durable construction for professional, daily-use environments.
Technical Specifications
| Part Number | 102397 |
|---|---|
| Description | Fluid Pressure Gauge (paint/coatings line) |
| Pressure Range | 0–3000 psi (≈206 bar) |
| Connection | ¼″ NPT (male), center back-mount |
| Typical Location | Manifold, regulator, or pump outlet gauge port |
| Use Case | Monitor fluid line pressure for setup, troubleshooting, and safety |
Install & Use Notes
- Verify the gauge port is ¼″ NPT and the system does not exceed 3000 psi.
- Use compatible PTFE tape or thread sealant; avoid excess that intrudes into the passage.
- Position for clear visibility; re-check for leaks after pressurizing.
Frequently Asked Questions
It will fit if your gauge port is ¼″ NPT (male) and your machine’s working pressure is ≤ 3000 psi. Check your model’s parts manual to confirm exact fitment.
No. Choose a gauge with a higher pressure rating than your maximum operating pressure for accuracy and safety.
It’s a center back-mount gauge with a ¼″ NPT male connection for compact, direct-manifold installation.
Use PTFE tape or a compatible thread sealant. Avoid over-application that could obstruct the passage and affect readings.
Inspect annually for accuracy and damage (lens, case, pointer). Replace if accuracy drifts, the face is cracked, or after severe vibration/shock events.
No reviews yet. Be the first to review this product!
