Graco 102471 Screw
$12.50
Available to Order
The Graco 102471 Screw is a durable hex-head cap screw designed for Graco pump and drum cover assemblies where a 3/8-16 UNC-2A × 1 inch fastener is required.
- Thread Size: 3/8-16 UNC-2A
- Length: 1 inch (25 mm)
- Material: Stainless Steel (SST)
- Head Type: Hex-Head Cap Screw
- Fits: Drum Cover & Stainless Steel Lower Pump Assemblies
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Compatibility for Graco 102471 Screw (HHC 3/8-16 UNC-2A × 1)
Compatible Machines / Assemblies
Listed below are the Graco assemblies where the 102471 hex-head cap Screw is commonly specified in official service manuals. Always verify with your unit’s parts list before ordering.
- Graco Drum Cover assemblies (Series A variants where 3/8-16 × 1 is specified)
- Graco Stainless Steel Lower pump assemblies (select models calling out part 102471)
- Graco agitator / ram / module sub-assemblies using HHC 3/8-16 UNC-2A × 1 fasteners
What is the Graco 102471 Screw?
The Graco 102471 is a hex-head cap Screw (HHC) with a 3/8-16 UNC-2A thread and 1 inch length. It’s commonly specified as stainless steel (“sst”) in Graco documentation and used to secure covers, modules, and lower pump components where this size and grade are called for.
Technical Specifications
| Part Number | 102471 |
| Description | Screw, hex-head cap (HHC) |
| Thread | 3/8-16 UNC-2A |
| Length | 1 inch (≈ 25 mm) |
| Material | Typically stainless steel (“sst”) as specified per assembly |
| Head Style | Hex-head cap Screw |
Fitment & Usage Notes
- Used where a 3/8-16 UNC-2A × 1 hex-head cap Screw is specified in Graco assemblies.
- Confirm stainless-steel requirement, quantity, and torque in your specific unit’s manual.
- Do not substitute different thread pitch or length; doing so may compromise clamp load or alignment.
Frequently Asked Questions
Dimensionally it matches a 3/8-16 UNC-2A × 1 hex-head cap Screw. However, Graco specifies materials and finishes based on application. For safety and warranty, use genuine Graco parts or an exact-spec equivalent verified against your manual.
Torque is assembly-specific. Refer to your machine’s service manual for the correct torque value for locations using the 3/8-16 fastener. Over- or under-torque can damage components or lead to loosening.
Quantity varies by assembly (e.g., drum covers may specify multiple pieces). Check the exploded diagram and parts list for your exact model to confirm counts and positions.
If a screw is damaged or corroded, replace it. In critical joints, replacing as a set can help maintain uniform clamp load. Follow any Graco guidance provided for your assembly.
Consult the latest Graco service manual for your unit. Look for bill-of-materials lines calling out “Screw, cap, hex head, 3/8-16 × 1, sst (102471).”
No reviews yet. Be the first to review this product!
