Graco 102806 Union Adapter Fitting 90 Deg
$190.50
In Stock
The Graco 102806 Union Adapter Fitting 90° provides a secure right-angle connection in your sprayer’s fluid system for precise line routing and easy maintenance.
- OEM Part #: 102806
- Type: Fitting – Union Adapter, 90°
- Use: Redirects fluid line at a 90-degree angle
- Feature: Union design allows simple disassembly for service
- Application: Common in pump and manifold assemblies
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Key Details for Graco 102806
Compatible Machines
Specific model compatibility for Graco 102806 (Fitting, Union Adapter, 90°) is not explicitly published in open parts lists. Please verify against your unit’s parts manual or assembly diagram.
- Check your sprayer’s parts list for item 102806.
- Match thread/port type and orientation (90°) in the fluid line or manifold.
- If unsure, share your model number with support to confirm fit.
Product Summary
The Graco 102806 is a factory Fitting described as a Union Adapter with a 90° elbow. It’s used to change direction in a fluid circuit while providing a union-style connection for serviceability.
Specifications
| OEM Part # | 102806 |
|---|---|
| Official Description | Fitting – Union Adapter, 90° |
| Function | Redirects flow at a right angle while enabling union-style disconnect for maintenance. |
| Typical Location | Fluid manifold / pump outlet lines / hard-to-route sections requiring a compact 90° turn. |
| Thread / Material | Refer to your machine’s parts breakdown to confirm exact thread type and material for your application. |
| Compatibility Note | Use only where the parts list explicitly calls out 102806 or an approved supersession. |
Highlights
- OEM-grade Graco Fitting for dependable sealing and alignment.
- Union Adapter design simplifies line removal and service.
- Compact 90° elbow aids routing in tight assemblies.
Fitment Guidance
- Locate the fluid line/port in your machine diagram that calls for 102806.
- Confirm thread size, seat type, and orientation (90° elbow) match your assembly.
- Replace seals/liners if the manual specifies new sealing components during service.
Tip: Keep line ends clean and torque to spec to prevent leaks.
Frequently Asked Questions
It’s a service-friendly connector that joins two sections while allowing disassembly without rotating long lengths of tubing. The 90° elbow also re-routes the line in tight spaces.
Check your model’s parts manual or schematic for item 102806. Confirm port size, thread, and elbow orientation match your assembly before ordering.
Only if the parts list specifies an official supersession. Angle alone is not sufficient—thread, sealing type, and union design must match OEM specifications.
Follow your manual’s guidance. Some connections use thread sealant or tape; others rely on flare/compression seats. Using the wrong method can cause leaks or damage.
Compare your unit’s serial range and revision level to the manual. Assemblies can vary by build date; contact support with your serial number for confirmation.
No reviews yet. Be the first to review this product!
