Graco 102859 Spring Element
$19.90
Available to Order
The Graco 102859 Spring Element is a genuine OEM internal spring that secures the filter element within select Graco in-line filter assemblies for stable, efficient filtration.
- Fits Graco filter models 213057 – 213061 and bowl 214001
- Maintains correct element preload and prevents bypass
- Durable steel construction for long service life
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Compatibility
Compatible Machines
The Graco 102859 Spring Element is used inside select Graco in-line filter assemblies. It is compatible with machines that use the following Graco filter models:
- Graco Filter 213057 — Element, 30 mesh
- Graco Filter 213058 — Element, 60 mesh
- Graco Filter 213059 — Element, 100 mesh
- Graco Filter 213060 — Element, 150 mesh
- Graco Filter 213061 — Element, 200 mesh
- Graco Filter 214001 — Bowl (element sold separately)
What It Is
The Graco 102859 Spring Element is the internal spring used to secure the filter element inside the bowl of the filter assembly. It maintains proper element preload to ensure reliable filtration performance.
Key Specifications
| Part Number | 102859 |
|---|---|
| Item Name | Spring, Element (filter element seating spring) |
| Function | Preloads and holds the filter element in position within the bowl to maintain proper flow and filtration. |
| Used With | Graco filter assemblies 213057, 213058, 213059, 213060, 213061, and bowl 214001. |
| Location | Inside filter bowl, beneath/against the element (dome end up on element during install). |
| Typical System Pressure* | Up to ~300 psi (per associated filter assembly rating). |
| Notes | Replace if deformed, fatigued, or lost spring force; incorrect preload can cause early bypass or poor filtration. |
Install & Use Notes
- When servicing the filter, install the element with the dome end up and ensure the spring seats squarely.
- Inspect the spring for corrosion, set, or damage during every element change.
- Use only genuine parts to maintain filtration performance and seal integrity.
Frequently Asked Questions
It fits machines that use Graco filter models 213057–213061 (various mesh elements) or bowl 214001. Check your sprayer’s parts list to confirm which in-line filter assembly it uses.
The spring preloads the element so it seals and stays centered in the bowl, helping the filter maintain proper flow and capture debris effectively.
Yes—install the element with its dome end up, verify the spring sits flat and centered, and reassemble the bowl per the manufacturer’s procedure.
Replace if the spring shows corrosion, deformation, or loss of tension, or whenever you notice reduced filtration performance or abnormal bypass indications.
Yes—Graco 102859 is an OEM spring element for the compatible filter assemblies listed above.
No reviews yet. Be the first to review this product!
