Graco 102969 Anaerobic Adhesive

Graco 102969 Anaerobic Adhesive is a genuine OEM thread-locking compound used to secure and seal threaded fasteners in Graco spray and pump assemblies.

Prevents loosening from vibration
Seals threads against leaks and corrosion
Used in Graco Ultra Max 695 and other compatible models
Recommended where parts manual specifies 102969

$7.35

Based on 0 reviews

Description

Quick Overview & Compatibility

Compatible Machines

This Graco 102969 Anaerobic Adhesive is used wherever the machine’s service manual specifies adhesive for thread-locking/sealing during assembly.

Known usage Ultra Max 695 (Complete Sprayer Pump 239769; models 232135 / 232137)
General Other Graco airless sprayers & pump assemblies where part 102969 is listed in the parts diagram (confirm by model & serial).

What is Graco 102969 Anaerobic Adhesive?

An OEM thread-locking and thread-sealing compound that cures in the absence of air when confined between metal surfaces. Ideal for securing threaded fasteners and sealing against leaks in high-pressure spray/pump assemblies.

Key Highlights

OEM Graco consumable for service and rebuilds
Locks threads to resist vibration-induced loosening
Seals threads to help prevent fluid leaks and corrosion
Applied sparingly—typically a drop or thin ring on male threads

Technical Specifications

Part Number	102969
Product Type	Anaerobic Adhesive (thread-locker/thread sealant)
OEM / Brand	Graco
Typical Use	Securing and sealing threaded fasteners in spray/pump assemblies
Fitment Guidance	Use only where the machine’s parts manual specifies 102969

Installation & Usage Notes

Clean threads (remove oil, debris, and old compound) before application.
Apply a small amount to male threads; assemble promptly per manual.
Torque fasteners to spec; allow curing per service guidance.
Always follow your machine’s service/parts manual instructions.

Frequently Asked Questions

It cures when air is excluded—i.e., once confined between metal threads—creating a durable bond that resists vibration and seals against leaks.

Use it only where the official parts diagram or service manual specifies 102969. Some assemblies require different compounds or methods.

Typically a small drop or thin ring on the male threads is sufficient. Excess is unnecessary and may hinder disassembly.

Disassembly is generally possible using proper tools and techniques recommended in the service manual. Heat or solvent may be required depending on the joint.

It serves as a thread-sealing/locking compound where specified by Graco. Follow the manual—some joints may still require PTFE tape or other sealants.