Graco 16X909 Coupled Hose 3/8" ID

Graco 16X909 Coupled Hose 3/8" ID is a genuine OEM pre-assembled hose designed for high-pressure paint and coating transfer in Graco airless systems.

3/8" internal diameter with factory-installed fittings
Ensures reliable, leak-free performance
Compatible with select Ultra, Mark, GMAX II, and DutyMax models
Durable OEM build for long service life

Retail Price: $80.5

You save: $6.68 (8.30%)

Our Price: $73.82

Based on 0 reviews

Description

Overview: OEM 3/8" ID Coupled Hose

Compatible Machines

This Graco 16X909 Coupled Hose 3/8" ID is used across many Graco airless systems that require a 3/8" fluid line with matched end fittings. Always confirm with your sprayer’s parts manual before ordering.

Graco Ultra 395 / 490 / 495 / 595 (Standard, ProContractor, IronMan – select units)
Graco Ultra Max II 695 / 795 / 1095 / 1595 (select units)
Graco Mark V HD and Mark X HD 3-in-1 series (select texture/airless rigs)
Graco GMAX II 3900 / 5900 / 7900 (select gas airless rigs)
Graco DutyMax GH 230 / 300 (select heavy-duty rigs)

Compatibility note: Fitment depends on hose length, end-connection thread and routing in your exact model revision. Verify via your official parts diagram to ensure 16X909 is specified for your unit.

About Graco 16X909 Coupled Hose 3/8" ID

The 16X909 is a genuine Graco OEM pre-assembled (coupled) hose with a 3/8" internal diameter designed for high-pressure coating transfer within Graco spray systems. “Coupled” means the hose ships with factory-installed end fittings for quick, leak-free installation when the part number matches your manual.

OEM build quality for reliable sealing and service life
Sized for 3/8" ID fluid paths to maintain proper flow
Intended for paint/coatings transfer in airless systems
Direct replacement when 16X909 appears in your parts list

Specifications & Highlights

Part Number	16X909
Type	OEM Coupled Hose (pre-fitted ends)
Internal Diameter (ID)	3/8"
Use Case	High-pressure fluid transfer in Graco airless systems (as specified)
End Connections	Factory-installed (match thread/seat to manual for your model)
Pressure/Chemical Suitability	Use only within the operating limits and materials called out by Graco for your sprayer

Note: Overall hose length and fitting thread type are model-specific. Confirm these in your parts diagram before purchase.

Fitment Tips

Match the part number from your machine’s official parts list
Verify end-connection thread/seat and length for your routing
Check pressure rating and material compatibility with your coatings
Replace worn seals/adapters when installing to prevent leaks

Frequently Asked Questions

Only if your official Graco parts manual lists 16X909 for that hose location. Graco uses multiple hose lengths and thread types; verify before ordering.

It arrives with factory-installed end fittings, ready to connect—no separate crimping needed when the part number matches your sprayer spec.

Use only the part number specified for your model and location. Substitutions require matching ID, length, thread/seat type and pressure/chemical ratings—consult Graco documentation before substituting.

Yes—Graco 16X909 is sold as an OEM replacement hose when specified in the parts manual for your sprayer.

Depressurize the system fully, keep connections clean, replace worn adapters/seals, torque to spec, and test for leaks with water or compatible solvent before loading coating.